YRM20_Ope_E.pdf - 第28页
1. Using this manual ii About this manual 1.1 Contents of each chapter This manual is comprised of the following chapters. Safety instructions This section provides safety instructions essential when using the machine. A…
1. Using this manual
i
About this manual
1. Using this manual
This manual is intended for machine operators, and mainly describes how to handle and operate
YAMAHA surface mounters and related equipment.
To use the machines safely and correctly, be sure to read this manual thoroughly before use.
c
CAUTION
Before using the machines, always read the "Safety instructions" in this manual and comply with instructions and rules
regarding safety.
n
NOTE
The control wiring diagram, maintenance support items, error message list and the like can be downloaded from YAMAHA
Service website. See Appendix,"A2. YAMAHA Service website for user" for details.
c
CAUTION
The parts (Part Nos.) in this manual are at the time of issuing this manual. The Part Nos. may be changed without prior
notice. Make sure to verify the latest Part Nos. before ordering.
1. Using this manual
ii
About this manual
1.1 Contents of each chapter
This manual is comprised of the following chapters.
Safety instructions
This section provides safety instructions essential when using the machine.
About this manual
Chapter 1 Part names and functions
Explains major part names and functions of the machine that you should know before attempting
operation.
Chapter 2 Basic operation
• Explains how to use buttons and screen descriptions.
• Explains how to set components up on the tape feeder and set it up on the machine.
• Explains typical errors and their remedial actions.
Chapter 3 Starting up the machine and manufacturing products
Explains a series of procedures from starting up the machine, manufacturing and ending manufacturing.
Appendix
Contains machine specifications.
Index
The index at the end of this manual helps you quickly find where necessary items are explained.
1. Using this manual
iii
About this manual
1.2 Page layout
The description below shows a typical page layout used in this manual.
Typical page layout
Step
Substep or
description of step
Figure, picture
or table caption
Note, Caution
or Warning
Chapter title
23000-KMX-00
■
Step
Describes the procedure for each operation.
■
Substep or description of step
Describes steps in detail.
■
Figure or table caption
This is the title of the figure or table and appears at the upper left.
■
Note, Caution or Warning
These are explained in detail in "Safety instructions".