YRM20_Ope_E.pdf - 第74页
4. Component supply section 1-43 Chapter 1 Unit names and functions █ T emporary placing of upper cover and precautions The upper cover can be placed temporarily upon handles of feeder exchange carriage. Also, a cover id…
4. Component supply section
1-42
Chapter 1 Unit names and functions
█
Attaching upper cover
1. Open upper cover
end
plate manually and hold position of upper cover guide section and end plate
as illustrated below (angle 30 degrees).
2. Insert upper cover into machine at an angle of 30 degrees. At this time, make far end pins and
second far end pins, located at both sides of upper cover, fit into their guides.
3. Close upper cover and confirm the cover locks at both sides click.
Approx. 30 degs.
Attaching upper cover
Approx. 30 degs.
■ Side view
Upper cover guide section
CLICK !
CLICK !
Far end pin (left)
Far end pin (right)
Second far end pin (right)
Second far end pin (left)
Upper cover end plate
23127-KMX-00
4. Component supply section
1-43
Chapter 1 Unit names and functions
█
Temporary placing of upper cover and precautions
The upper cover can be placed temporarily upon handles of feeder exchange carriage.
Also, a cover identification label attached to upper cover carries machine serial number and number of
carriage set position.
The upper cover is not compatible for other carriage set position or other machine, as the guide position
is adjusted for the correspond machine upon assembling and then the carriage is shipped. Use with the
machine/carriage set position written on cover identification label.
Temporary placing of upper cover
■ Cover identification label
23128-KMX-00
4. Component supply section
1-44
Chapter 1 Unit names and functions
Moreover, sensors are equipped to detect upper cover at carriage set position of machine.
The upper cover end plate detection sensor detects attaching fault of cover end plate, and the upper
cover safety switch detects whether the cover closes correctly.
When even one fault is detected by these two sensors, automatic operation cannot start.
Sensors for upper cover
Upper cover end plate detection sensor
Upper cover safety switch
■ Upper cover end plate detection sensor
Normal Upper cover attaching fault
Normal Upper cover unfinished attaching
■ Upper cover safety switch
23129-KMX-00