YRM20_Ope_E.pdf - 第131页
3. Displaying the production monitors 2-34 Chapter 2 Basic operation 3.6 Fiducial T he Fiducial screen sho ws the results of recognizing fiducial marks such as “Board, Bloc k”, “2 P oint Local” and “P oint” and the corre…
3. Displaying the production monitors
2-34
Chapter 2 Basic operation
3.6 Fiducial
The Fiducial screen shows the results of recognizing fiducial marks such as “Board, Block”, “2 Point Local”
and “Point” and the correction result.
Monitor: Fiducial
24217-KMX-00
• Table Select
Select a head unit.
• Fiducial Type
Select the type of the fiducial mark such as "Board, Block", "2Point Local" or "Point".
• Align X, Y, R
Shows the differences between the fiducial mark recognition results and the input coordinate entered in
the board data with positive or negative values.
• Align Ratio
Shows the rate of expansion of the board, calculated by using the X, Y and R offset values.
• Result
Shows the recognition results as a "Pass" or "Unfinished ". The "Unfinished" message changes to "Pass" after the
mark has been recognized successfully.
3. Displaying the production monitors
2-35
Chapter 2 Basic operation
3.7 Badmark
The [Badmark] screen shows the recognition results of badmarks such as "Board, Block" and "Local"
badmarks.
Monitor: Badmark
24218-KMX-00
• Table Select
Select a head unit.
• Badmark Type
Select the type of the badmark such as "Board, Block" or "Local".
• X, Y
Shows the board data input values (by taking block offset amount into account).
• Result
Makes an "OK" or "NG" decision based on the badmark recognition result.
OK: Failed in recognizing a bad mark: Means components are mounted.
NG: Succeeded in recognizing a bad mark: Means components are not mounted.