YSP_Users_E.pdf - 第105页
4-2 4 Creating and setting the data 4 C reate necessary data. Default values are preset for the newly register ed board data. Create or edit necessary data while referring to the descriptions and guidelines in subsequent…
4-1
4
Creating and setting the data
1. Creating new data
First, you must register a new board name to create new data. Register a new board name as follows.
1
Press the [Create] button on the Setup screen.
The "Create Board Data" dialog box appears as shown below.
[Create] button
Create Board Data dialog box
64401-L3-00
2
Enter a board name in the "File name" box.
Enter a board name within 20 alphanumeric characters from the keyboard.
Do not use spaces and symbols other than underbars ( _ ) .
Entering a board name
Enter the board name and press [OK].
64402-L3-00
3
Press the [OK] button.
The display returns to the Setup screen.
TIP
An alert dialog box appears if a board data with the same name has already been registered. If this happens, press
the [Cancel button and reenter a different name. (If you register the same name by overwriting the previous data,
press the [OK] button.)
4-2
4
Creating and setting the data
4
Create necessary data.
Default values are preset for the newly registered board data. Create or edit necessary data while
referring to the descriptions and guidelines in subsequent sections "2 to 7" in this chapter.
5
Save the new board data.
1. Press the [Save] button in the main menu button area.
The "Board data save" dialog box appears showing the board list.
2. Check the drive and folder to save the board data and press [Save] button.
[Save] button
Saving the PCB data
[Save] button
Check that the PCB name to be saved is displayed here.
64403-L3-00
TIP
If you press the [Off] button to quit the software before storing the board data, a confirmation dialog box appears
asking you to save the board data. Pressing the [Yes] button in this dialog box opens the Board Data Save dialog as
shown above.
4-3
4
Creating and setting the data
2. Basic data setting
As you have set the parameters on the [Basics] tab screen, you can start the normal printing.
Each parameter is linked with normally used parameters provided on the [Board], [Mask], [Squeegee] and
[Cleaner] tab screens. If you want to make the detailed setting, you must select relevant tab and set data
directly.
2.1 Configuration of [Basics] tab screen
The [Basics] tab screen is mainly classified into three areas. Additionally, operation buttons on this tab screen
are intended to directly perform the manual operation necessary for the setup or other work.
[Basics] tab
2
1
3
64404-L3-10
1. “Material and Setup Information” area
The parameters mainly related to the setup work are extracted from those provided on the [Board], [Mask], and
[Squeegee] tab screens.
Material and Setup Information area
64405-L3-10
• Board Name, Board Size XY, Board Height, Solder Name, Edge Clamp Pressure
For more details, see items A to E and N of “3. Board data setting” in a later part.
• Mask Name, Mask Size, Mask Standard Position
For more details, see items A to E of “4. Mask data setting” in a later part.
• Squeegee Detail Type
For more details, see item A of “5. Squeegee data setting” in a later part.