YSP_Users_E.pdf - 第181页
5-25 5 Managing the data n File names automatically saved Item Display item File name example MIS Error log ErrLog20140310.csv Board log PcbLog20140310.csv Program log LotLog20140310.csv Unit log Conveyor Y vpConv2014031…
5-24
5
Managing the data
3.2 Production and operation log settings
Press the [Software Setting] button or [History] button on the [Setup]-[Utility] tab screen to set the log.
3.2.1 Specifying the auto-save destination
Log data can be automatically saved in the specified locations at the time when the machine is turned off. To
specified the save destination, follow these steps.
1
Press the [Software Setting] button on the Setup screen.
The "Setting" screen then appears. Open the [History] tab.
2
Press the [MIS] or [Unit log] button.
• Press the [MIS] button to set the save destination of production log data.
The "MIS Setting" dialog box appears.
• Press the [Unit Log] button to set the save destination of operation log data.
The "Unit Log Setting" dialog box appears.
3
Set the server paths.
1. Press the [Browse] button and specify the path to each folder where the log data will be stored. (You
can directly enter the paths in each path entry box.)
2. After specifying the folders, press the [OK] button.
Log data will be automatically saved in the folders specified here.
Specifying the destination to save log data
[History] tab
[Software Setting] button[History] tab
64558-L3-00
c
CAUTION
A file, into which the production log or operation log is saved, has a name that date is attached to the file name. In
this case, the log data on the same day is updated every time the board is changed.
As the number of files increases by date, the free area may become insufficient. As a result, the board data may not
be saved or it may be failed to start up the software. Therefore, do not specify the machine for the save destination.
5-25
5
Managing the data
n
File names automatically saved
Item Display item File name example
MIS
Error log ErrLog20140310.csv
Board log PcbLog20140310.csv
Program log LotLog20140310.csv
Unit log
Conveyor YvpConv20140310.csv
Mask YvpMask20140310.csv
Squeegee YvpSqueegee20140310.csv
Cleaner YvpCleaner20140310.csv
TIP
Each file is automatically named when saved. It consists a predetermined log name (ErrLog, PcbLog, etc.) followed
by a number representing the date such as "20140310" (March 10, 2014).
A new file is created each day.
4
Press the [History] button on the “Setting” screen.
The “Setting Detail History” dialog box then appears.
5
Select the check boxes as needed.
“Setting Detail History” dialog box
64559-L3-00
• "Remember the lot log" check box
When this check box is selected, the board data that was in use when the machine power was
turned off will be loaded again the next time the power is turned on, in order to take over its
operation history data.
• "Multi Language Output" check box
When this check box is selected, the operation history data can be saved or loaded in multi-
language mode.
• "FullASCII Output" check box
When this check box is selected, characters not applicable to this machine (illegal characters) are
converted automatically in the file read process.
Illegal characters (example): !#$%&@*<>?/, etc.
5-26
5
Managing the data
• "Same Board Name taking over LotPartsLog" check box
When this check box is checked on, the current production board, lot log, and production log are
succeeded as the board data with the same name as the name of the board data that is currently
loaded is selected when the board is changed.
n
NOTE
This function is enabled only when selecting the board data by pressing the [Board] button on the Setup screen.
This function is disabled when changing the board using "automatic setup function" of IT Option and "remote control
function" of YFact.
• "History output setting of specified time" check box
Select this check box when you want to specify the time to output the operation history data.
After selecting this check box, enter the time in military time (24-hour clock format) in the “Specified
time” box. By making this setting, the machine automatically outputs and saves the operation history
data at the specified time every day.
When the “After the history output, the unit logs are reset” check box is selected, the “Unit log” data
will be reset after the production history data is output.
• "Limit size of total history" box
When you want to set a limit on the total amount of operation history data to be saved, enter it
here. An alarm will occur when the free space of the destination approaches the limit size specified
here. No limit will be placed when set to "0".
6
When finished setting, press the [OK] button.
The display returns to the “Setting” screen, and press the [Close] button to close it.