YSP_Users_E.pdf - 第172页

5-16 5 Managing the data 2. Creating the user database Registering marks in the user database will prove convenient if they are not included in the Y AMAHA database or they are used ver y frequently . The user database s…

100%1 / 278
5-15
5
Managing the data
5
Check the settings for restore and start restoring the backup data.
1. When the “RESTORE” dialog box appears, check the flash disk drive and the path to the system full
backup data.
2. After checking, select the “Determine” check box, and the [Execute] button appears.
3. Click the [Execute] button to start the restore process.
Checking the restore settings and executing restore
Flash disk drive
Path to the system full backup data
“Determine” check box
[Execute] button
64547-L3-00
4. When finished restoring the system data, the “Success” dialog box appears. Click the [OK] button,
and the [Next] button in the “RESTORE” dialog box changed to the [Finish] button.
5. Click the [Finish] button to finish the restore process.
Restore process is complete
64548-L3-00
6
Install the flash disk into the machine.
Install the new flash disk containing the restored system data into the machine.
Restoring the system full backup data is now complete.
5-16
5
Managing the data
2. Creating the user database
Registering marks in the user database will prove convenient if they are not included in the YAMAHA
database or they are used very frequently.
The user database should be registered in the user area of the database. The user database area can be
from No. 1 to No. 149 for the mark database. The registered data in this area will be retained even if the
software version is upgraded.
2.1 Copying the data into the database
To copy the component or mark data you created into the user database, follow these steps.
1
Select the board data name.
Press the [Board] button on the Setup screen and select the board data.
2
Open the Mark screen.
Press the [Mark] button in the main menu button area.
3
Select the copy source data.
Line up the cursor with the mark data you want to copy from.
4
Open the database list.
Press the [Database] button on the [Basic] tab. The database list appears.
Database list
Copy source
[Database] button
64505-L3-10
5-17
5
Managing the data
5
Press the [New] button and designate the database number.
The database number input dialog box appears. Enter the database number under which the data will
be stored. Leave blank to store the data in the first free number.
Database number input dialog box
Enter the database number where data should be copied.
64506-L3-10
6
Press the [OK] button to copy the data into the database.
All items of the selected data including the data name and comment will be copied. Press the [Clear]
button to return to the database list.
Database registration message
64507-L3-00
TIP
Repeat the above procedure when you want to copy other data into the database.
7
Press the [Close] button to close the database list.