YSP_Users_E.pdf - 第39页
i About this manual 1. About this manual This manual is intended for machine operators, and mainly describes how to handle and operate Y AMAHA surface mounters and related equipment. T o use the machines safely and corre…
About Instruction
The instruction manual of this machine is written for those who operate
this machine.
Please read this manual carefully for correct operations and pay
special attention to safety precautions.
After reading through this manual, please use this manual as an
occasional reference and keep it within reach.
About this manual
Contents
1. About this manual i
1.1 Revision record i
1.2 Contents of each chapter ii
1.3 Page layout iii
i
About this manual
1. About this manual
This manual is intended for machine operators, and mainly describes how to handle and operate YAMAHA
surface mounters and related equipment.
To use the machines safely and correctly, be sure to read this manual thoroughly before use.
c
CAUTION
Before using the machines, always read the "Safety instructions" in this manual and comply with instructions and rules
regarding safety.
c
CAUTION
The contents of these manuals are subject to change without prior notice. Please be sure to contact our sales office or
representative to obtain the latest information on part names and part numbers.
1.1 Revision record
Major revisions in this manual (Version 2.00) are described below.
Version No. Description of revision Issue date
1.00 YSP user's manual first edition Jul. 2009
1.10
Description of cleaner vacuum pressure gauge was added.
Description of mask stopper pin storing position was added.
Description of squeegee installation was added.
Printing guide was added.
Nov. 2009
1.20 Typing errors, etc. were corrected. Jun. 2010
1.20
Description of blocking the solder printer's solvent pump was added.
The method of replacing the YSP squeegee scraper was changed.
Sep. 2010
1.30
Description of replacing the blower hose was added.
Description of adjusting the conveyor belt tension was added.
Production history details were modified.
Sep. 2011
2.00
Some warning labels are added to "Safety-3 Warning labels" .
"7-6 Replacing the conveyor belt" was added.
"4-8 Graphic alignment" was revised.
"8-2.5 Inspecting and cleaning the air/mist filter" was added.
"7-5.3 Cleaning and replacing the filter for the mask vacuum chuck" was
added.
Some mis-writings were revised.
Jan. 2018
ii
About this manual
1.2 Contents of each chapter
This manual is comprised of the following chapters. The appendix at the end of this manual gives quick
reference tables for the board support jig combination and applicable masks (stencils). An index is also
provided at the end of this manual to provide easy access to information located throughout the manual.
Chapter 1 Part names and functions
This chapter explains major part names and functions of the machine which you should know before attempting
operation.
Chapter 2 Basic operations
This chapter explains how to start up the machine and turn it off, as well as the basic menus and buttons displayed on
the screen for machine operation and data input.
Chapter 3 Daily operation
Chapter 3 describes the routine operation for board production including the conveyor unit setups, and also explains
how to read the production history data.
Chapter 4 Creating and setting the data
Chapter 4 explains the basic procedures for creating board data and also making basic settings for various parameters.
Chapter 5 Managing the data
This chapter explains how to back up data and make a user database, as well as how to view and save the production
and machine operation logs.
Chapter 6 Other functions
This chapter explains efficient data creation tools, such as coordinate data teaching and trace functions, and manual
operation.
Chapter 7 Replacing the consumable parts
This chapter explains how to replace the cleaning gauze roll and cleaning alcohol, etc.
Chapter 8 Inspection and maintenance
Chapter 8 describes checkpoints and procedures for daily and periodic inspections that you should perform. Additionally,
the grease-up work is explained using the list of lubrication locations.
Appendix
In the appendix, you will find necessary machine specifications, such as air pressure settings, power supply voltage, and
input and output signals for connections between machines, and the board support jig combination table and applicable
masks (stencils) used as reference data for the setup work.
Printing guide
This guide explains the flow of the condition setting (data setting) and the setup work necessary to perform the printing
with excellent quality.
Additionally, describes the relationship between the print trouble symptom and the conditions that may be the cause of
the trouble.