YSP_Users_E.pdf - 第165页

5-9 5 Managing the data 4 Start making a backup. n T o make a system backup: 1. Press the [Backup] button. 2. A confir mation message appears asking if you want to make a backup file. Check the backup destination and the…

100%1 / 278
5-8
5
Managing the data
1.2.2 Making a backup
The following steps describe how to back up system data using a USB memory device.
1
Insert a USB memory device into the USB port.
The USB port is located behind the media access door on the front left of the machine.
2
Check the USB memory connection.
The indicator on the lower left of the operation screen shows the connection status.
The connection is complete when the USB memory icon appears red.
The connection is incomplete if the USB memory icon is grayed out. Try reconnecting the USB memory.
3
Open the “System backup” screen.
Press the [System Backup] button on the [Setup]-[Utility] tab screen.
“System backup” screen
USB memory icon
64537-L3-00
5-9
5
Managing the data
4
Start making a backup.
n
To make a system backup:
1. Press the [Backup] button.
2. A confirmation message appears asking if you want to make a backup file. Check the backup
destination and then press the [Yes] button.
System backup will start.
3. Another message appears when system backup is complete. Press the [OK] button to close the
message screen.
System backup
Check the backup destination.
64538-L3-00
4. When returned to the “System backup” screen, press the [Close] button to exit it.
n
To make system full backup:
1. Press the [Full Backup] button.
2. A confirmation message appears asking if you want to make a backup file. Check the backup
destination and then press the [Yes] button.
System full backup will start. It will take about 20 minutes to complete.
c
CAUTION
If you want to cancel the backup, press the ESC key on the keyboard.
The data being created will not be deleted even if the backup is cancelled (or fails).
5-10
5
Managing the data
3. Another message appears when system full backup is complete. Press the [OK] button to close the
message screen.
System full backup
Check the backup destination.
64539-L3-00
4. When returned to the “System backup” screen, press the [Close] button to exit it.
5. Check that three files were created in the destination folder.
These files are used to restore the system full backup.
Full backup data
64540-L3-00
c
CAUTION
The files created by system full backup contain the machine settings, network settings, and board data, so keep them
very carefully.