YSP_Users_E.pdf - 第206页

6-22 6 Other functions 4.4 [Unit] - [Squeegee] tab screen T he [Unit] - [Squeegee] tab screen allows you to manually operate the squeegee head and c heck the status of the squeegee sensors on the graphic view . T he func…

100%1 / 278
6-21
6
Other functions
4.3 [Unit] - [Mask] tab screen
The [Unit] - [Mask] tab screen allows you to manually operate the mask vacuum gripper and check the status
of the mask sensors on the graphic view. The function of each button is described below.
[Unit]-[Mask] tab screen
1 3
2
64620-L3-00
n
Operation buttons
Button name Function
1 Axis Opens the "Move Axis" screen. (See "4.1" in this chapter.)
2 Mask Vacuum Turns the mask vacuum gripper on or off.
3 Fiducial Correction Moves the vision camera to recognize mask fiducial marks.
6-22
6
Other functions
4.4 [Unit] - [Squeegee] tab screen
The [Unit] - [Squeegee] tab screen allows you to manually operate the squeegee head and check the status of
the squeegee sensors on the graphic view. The function of each button is described below.
[Unit]-[Squeegee] tab screen
<3S squeegee>
<Double squeegee>
5
4
2
3
1
64621-L3-00
n
Operation buttons
Button name Function
1 Move Squeegee
Moves the squeegee head to the squeegee attach/detach position (front side) or
to the escape position (rear side).
2 Axis Opens the "Move Axis" screen. (See "4.1" in this chapter.)
3 Squeegee Direction
Switches the squeegee printing direction.
The squeegee printing direction is from front to rear just after board data is
loaded or the [RESET] button is pressed. Then, the printing direction will be
switched alternately.
4
Squeegee 1 Down
Squeegee 2 Down
(Only for double-squeegee type)
Moves up and down the squeegee 1 or 2.
6-23
6
Other functions
4.5 [Unit] - [Cleaner] tab screen
The [Unit] - [Cleaner] tab screen allows you to manually operate the cleaner unit and check the status of the
cleaner unit sensors on the graphic view. The function of each button is described below.
[Unit]-[Cleaner] tab screen
4 56 7
3
8
2
1
64622-L3-00
n
Operation buttons
Button name Function
1 Axis Opens the "Move Axis" screen. (See "4.1" in this chapter.)
2 Automatic Cleaning Press this button to automatically clean the backside of the mask.
3 Manual Cleaning Press this button when you want to manually clean the mask.
4 Cleaner Up/Down Moves the cleaner unit up or down.
5 Paper Rolling Winds up the gauze roll (lower roll) at a specified pitch.
6 Cleaner Paper Fix
Releases the gauze roll take-up shaft coupling. Pressing this button again,
engages the take-up shaft coupling.
7 Fuel Pump Discharges a specified amount of cleaning solvent onto the gauze roll.
8 Cleaner Connect Connects or releases the cleaning unit and conveyor unit.