YSP_Users_E.pdf - 第58页
1-16 1 Part names and functions 4.4.1 MANUAL mode When you w ant to visually inspect solder paste printed on a board, set the A UT O/MANUAL switch to "MANUAL". When MANUAL mode is selected, the board transferre…
1-15
1
Part names and functions
4.3 Board carry-in and carry-out conveyors
The carry-in conveyor receives a board from the upstream machine (loader, etc.) and brings the board onto the
board clamp table. The carry-out conveyor receives the board from the board clamp table and transfers the
board to the downstream machine. The conveyor width is automatically adjusted according to the board width
(Board Size Y). The carry-in and carry-out conveyor positions change depending on the board transport
direction. (Right-to-left flow on standard machines)
Board carry-in and carry-out conveyors
Example of right → left flow
Carry-out side (example using extended exit conveyor) Carry-in side
63116-L3-00
4.4 Extended exit conveyor (option)
YSP machines equipped with an optional extended exit conveyor allow making a visual check of printed solder
paste at the conveyor exit.
Extended exit conveyor (option)
Safety cover
63117-L3-00
1-16
1
Part names and functions
4.4.1 MANUAL mode
When you want to visually inspect solder paste printed on a board, set the AUTO/MANUAL switch to
"MANUAL". When MANUAL mode is selected, the board transferred from the board clamp table temporarily
stops at the exit on the extended conveyor. You can inspect the printed solder paste visually with the procedure
described below.
AUTO/MANUAL switch
MANUAL mode
63118-L3-00
1
Make sure that a board has stopped on the extended exit conveyor.
The CHECK button lamp lights up when a board stops in the exit position (exit stopper position) on the
extended exit conveyor.
Temporary board stop position
Exit stopper
63119-L3-00
2
Inspect the board.
You can pick up a board from the extended exit conveyor and inspect how accurately the solder paste
is printed on the board.
3
Return the board to the extended exit conveyor after inspecting it.
4
Press the CHECK button.
The CHECK button lamp turns off and the board is then transferred to the downstream machine.
1-17
1
Part names and functions
4.4.2 AUTO mode
If no visual check is needed, set the AUTO/ MANUAL switch to "AUTO". The AUTO mode permits automatic
operation that continuously transports boards to the downstream machine. (The CHECK button is disabled
during AUTO mode.)
AUTO/MANUAL switch
AUTO mode
63120-L3-00