JANETS_INM.pdf - 第165页
JaNets In structio n Manual 5. Shopflo or Setu p 5- 45 Permanent Information When you ch eck th is check box, the perm ane nt infor mation is t o be printed. At the same tim e, the check boxe s “Perma nent Nozzles” and “…
JaNets Instruction Manual 5. Shopfloor Setup
5-44
Setting the “Data to Save” tree
Figure 5.7-3 “Data to Save” (T) tree – Unchecking the higher hierarchy
Figure 5.7-4 “Data to Save” (T) tree – Unchecking the middle hierarchy
Setting the “Information” group box
Set which information of the hierarchy checked on the “Data to Save” tree is to be printed.
Figure 5.7-5 “Information” group box
How to check the tree structure:
When you click the [+]/[-] mark on the “Data to Save” tee, the lower
hierarchy is displayed or not. When you press the [Alt] key and the
[T] key at the same time, the “All Data” check box can be checked
on the “Data to Save” tree. When you press the [↑] key or the [↓]
key, you can move to the check box of the higher or lower
hierarchy. When you press the [←] key or the [→] key, you can
develop the hierarchy.
If you deselect the check box of the middle hierarchy when the “All
Data” check box is checked, its lower hierarchies are unchecked,
and the higher hierarchy they belong to are marked to indicated
that it is checked and unchecked.
Check the check box of the desired item displayed on the left to
select it.
Environment Settings: The units set on the “Set Environments”
screen are to be printed.
Equipment Setup: The number of each of tape feeders, stick
feeders, bulk feeders, stick changers and nozzles set on the
“Equipment Setup” screen is to be printed.
Floor: The number of assigned production lines and that of the
assigned machines are to be printed.
Line: Information on the production line configuration and that on the
environment of each production line are to be printed.
Machine: The machine detailed items except the “Permanent
Information” are to be printed.
Permanent Information:
See Section “Permanent Information.”
JaNets Instruction Manual 5. Shopfloor Setup
5-45
Permanent Information
When you check this check box, the permanent information is to be printed. At the same time,
the check boxes “Permanent Nozzles” and “Permanent Feeders” are enabled.
Figure 5.7-6 “Permanent Information” check box
Print Previewing
When you select the <Preview> button on the “Print Settings” screen, the print image of the
information checked on the “Print Settings” screen is created.
Figure 5.7-7 “Preview” screen
Print Settings dialog box
When you select the <OK> button on the “Print Settings” screen, the “Print Settings” dialog box
appears on the screen, and the system starts printing.
Permanent Nozzles:
Information set on the “Permanent Nozzles”
setting screen is to be printed.
Permanent Feeders: Information set on the “Permanent Feeders”
setting screen is to be printed.
When you click the [File]
command on the menu bar, then
the [Print] command on the “File”
menu, or when you click the print
button on the toolbar, the system
displays the “Print Settings”
dialog box described in Section
5.7.1.3 “Print Settings dialog
box” on the screen. When you
click the <Close> button, the
“Print Settings” screen
reappears.
JaNets Instruction Manual 5. Shopfloor Setup
5-46
Outputting text
When you select the [File] command from the menu bar, and the [Save as Text] command from the
“File” menu, the “Save as Text” screen appears, and the system outputs the data set with the
Shopfloor Setup application as a text file.
Figure 5.7-8 [Save as Text] command
See Section 5.7.1.1 “Printing production
line information
(settings, production line/machine
information)” for descriptions and
operations of the “Save ad Text” screen,
“Data to Save” tree and the “Permanent