JANETS_INM.pdf - 第415页
JaNets Instr ucti on Man ual 8. Job Optim izer 8- 30 No. of Components Figure 8.3 - 51 Main scr een – [V iew] – [No. of C omponents] * In the case of RX - 7 series , a display is m ade but the editing func tion ca nnot b…
JaNets Instruction Manual 8. Job Optimizer
8-29
Feeder Layout
When you select the commands, [View]-[Feeder Layout], the layout screen appears.
Figure 8.3-50 Main screen – [View] – [Feeder Layout]
The Job Optimizer allows you to move a cluster of feeders.
Note that a feeder can be moved only if the following requirements are satisfied:
- A reservation file is optimized when the radio button “Fix all feeder positions within a cluster” is
selected on the “Multi-optimize Options” screen invoked from “Optimize” command.
- A cluster is selected on the “Feeder Layout” screen, and “ALL” is selected for the menu item
“Specify Production Program.”
To move a feeder to a different machine, the cluster number should be the same. After you change
the feeder layout (that is, quit the “Feeder Layout” screen), this layout information is stored in the
production program.
Therefore, the program is put in the not-optimized state (the cluster information is cleared also), so
you have to execute the optimization function again.
Note that any reference feeder is not considered.
* When optimization is not executed or
the production program is changed after
optimization, any selection cannot be
made.
JaNets Instruction Manual 8. Job Optimizer
8-30
No. of Components
Figure 8.3-51 Main screen – [View] – [No. of Components]
* In the case of RX-7 series, a display is made but the editing function cannot be used.
When you enter the initial value or change it, the entered value is copied to the “Remain” field.
Figure 8.3-52 “No. of Components” dialog box
(If the warning of a component run-out error is issued)
8.3.17.1 Cutting the number of components data
Figure 8.3-53 “No. of Components”
(Cutting values in the “Initial,” “Remain” and “Level” fields)
Select a line from the “No. of Components” dialog box, and click the selected line
with the right button. Select the [Cut] command on the displayed menu to cut the
data in the “Initial,” “Remain” and “Level” fields. The values in the “Initial,”
“Remain” and “Level” fields of the selected line are copied to the clipboard, and
“0” is entered in the “Initial,” “Remain” and “Level” fields.
Initial: number of components supplied
before PWB production starts
Level: When a number other than
“0” is entered, the system warns you
that the components are going to run
out by changing the color.
Warning for a component run-out error (background color of a line):
When the number of remaining components becomes smaller than the
value set in the “Level” field, the background color becomes yellow.
After selecting a line on the Reservation list,
select the [View] command, and then the [No.
of Components] command.
The “No. of Components” dialog box for the
selected production program appears on the
screen.
* You cannot select this command if
optimization is not performed, if a
production program is changed after
optimization is performed, or if no line is
selected in the Reservation list.
JaNets Instruction Manual 8. Job Optimizer
8-31
8.3.17.2 Copying the number of components
Figure 8.3-54 “No. of Components”
(Copying the values in the “Initial,” “Remain” and “Level” fields)
8.3.17.3 Pasting the number of components
Figure 8.3-55 “No. of Components”
(Pasting values in the “Initial,” “Remain” and “Level” fields)
* When pasting a value to “Initial”, “Remain” and “Level” for a component of which “Packaging
Style” is “Tray”, you cannot paste a larger number than the maximum number of components
that can be stored in a tray. If you try to paste the larger number, the maximum number is
pasted.
Information common to the commands [Cut], [Copy], [Refill] and [Clear] on the “No. of
Components” screen
To select two or more lines ([Refill] command): While holding down the [Ctrl] key, select lines
with the mouse, or after selecting the start line, select the end line while holding down the [Shift]
key.
8.3.17.4 Refilling components
Follow the instruction ① or ② shown below. In this case, the corresponding initial value is
copied to the “Remain” filed of the selected lines.
Figure 8.3-56 “No. of Components” (Refill)
Click the selected line with the right button, and then select the [Copy] command from the
displayed menu. The values in the “Initial,” “Remain” and “Level” fields can be copied.
Click the selected line with the right button, and then select the [Paste] command from the displayed
menu. The cut or copied values in the “Initial,” “Remain” and “Level” fields can be pasted. The number of
lines of data on the number of components copied to the clipboard can be pasted from the selected line.
①
Select the desired line from the “No. of Components” dialog box, and select the <Refill> button
displayed on the bottom of this dialog box.
② Select the desired line from the “No. of Components” dialog box, and click the selected line with the
right button. You can also execute the [Refill] command for two or more lines.