JANETS_INM.pdf - 第530页
JaNets Instr ucti on Man ual 13 . Program D ownloa der 13 - 34 13.9.11 Interruption produc tion This is a funct ion for addi ng a product i on progr am not planned to the Pr oduct ion sch edule list. Y ou can add a progr…
JaNets Instruction Manual 13. Program Downloader
13-33
13.9.10.8 Requirements for switching production to the next reservation file
You have to switch production to the next reservation file only if all production programs of the
current reservation file finish being used for production. When you select “Machine” for the menu
item “Loading Mode,” the current reservation file is switched to the next one sequentially from a
machine that has finished production of all programs stored in the current reservation file.
If there is no program to be downloaded in a reservation file when production of all programs does
not finish, for example, because some program of the reservation file is set to “Skip production,”
the message shown in Figure 13.9-28 appears on the screen after uploading. Any file that exists
in the next reservation file is not automatically downloaded.
Figure 13.9-28 If a program of the reservation file
whose production has finished completely is set to “Skip production”
To restart the production in this state, perform one of the operations below.
1. Restart production of the reservation file: Set a program that is contained in the reservation
file and whose “Skip production” state is ON to OFF, and then download the program from the
menu.
2. Start production of the next reservation file: right-click a program that is contained in the
reservation file and whose “Skip production” state is ON, select [Change status to finished] to
put the production into the completion state, and then download a program from the menu.
JaNets Instruction Manual 13. Program Downloader
13-34
13.9.11 Interruption production
This is a function for adding a production program not planned to the Production schedule list.
You can add a program to production either according to a production program or a reservation
file.
13.9.11.1 Calling the function
Select a program located at a positon to which you want to add another program among programs
displayed in the Production schedule list, and click the right button of the mouse. The menu
including the command [Add a production program] appears on the screen. Next, select the
positon to which you want to add a program on the submenu. Select the command [Add above
this program] to add a program above the selected program. Select the command [Add below
this program] to add a program below the selected program.
Figure 13.9-29 Calling the function for adding a production program
When you select the menu command [Add above this program] or [Add below this program], you
are supposed to specify a file to be added. The operation varies depending on whether you use
the Data Manager or not. If you cannot add any program to the selected position, the menu is
disactivated. The conditions under which any program cannot be added are described below.
[1] If all programs displayed in the Production schedule list finished the corresponding
productions, you cannot add any program.
[2] When you select the first program in the Production schedule list, you cannot select the
command [Add above this program].
[3] You cannot add any program between two programs whose productions have finished.
[4] If there is data to which “Cluster teaching” is specified in a reservation file, any program
cannot be added to the reservation file regardless of whether you will perform teaching
operation or not.
JaNets Instruction Manual 13. Program Downloader
13-35
13.9.11.2 Specifying a program to be added (when the Data Manager is not used)
Select a program to be added on the dialog box for specifying a file. You cannot specify two or
more programs.
13.9.11.3 Specifying a program to be added (when the Data Manager is used)
When you use the Data Manager, the screen for specifying a program selection method appears:
select a program from a folder of the JaNets PC or select a program among those displayed with
the Program Explorer.
Figure 13.9-30 Screen for selecting a place where a program to be added is saved
When you click the <Folder> button
Select a program to be added on the dialog box for specifying a file in the same manner as
when the Data Manager is not used.
When you click the <Program Explorer> button
Programs displayed with the Program Explorer are displayed in a tree list form. Note that a
program not specified for an active display production line or a program checked out by
another user who has logged in the system is excluded.