JANETS_INM.pdf - 第743页
JaNets In structio n Manual B. T roubleshootin g B- 10 D isplay t he “ Secur ity ” tab, and then ch eck to se e if th e acces s per mission “ Ever yone ” is shown in the list. If it is not, add the ac cess permiss ion “ …
JaNets Instruction Manual B. Troubleshooting
B-9
Check to see if “isuser” is shown in the “Permission entries” list. If it is not, add it to the list,
and then check the “Allow” check box for the setting item “Full control.”
- Whether you have a permission to start up RemoteServer.exe.
Select the “Common” folder of the JaNets installation folder, and click with the right button to
display the menu command [Properties].
JaNets Instruction Manual B. Troubleshooting
B-10
Display the “Security” tab, and then check to see if the access permission “Everyone” is
shown in the list. If it is not, add the access permission “Everyone,” and then check the
“Allow” check box for the setting item “Full control.”
Select “RemoteServer.exe” under the “Common” folder, and then click with the right button to
display the [Properties] menu command. Display the “Security” tab to check to see if the
access permission “Everyone” is shown in the list. If it is not, add the access permission
“Everyone,” and then check the “Allow” check box for the setting item “Full control.”
JaNets Instruction Manual B. Troubleshooting
B-11
B.5 JaNets Cannot Communicate with Some Mounter.
[Phenomenon]
JaNets cannot communicate with a mounter: KE-2050/2060/2070/2080 series, KE-3000 series
or FX-3 series mounter or a KD-2077 dispenser.
As a result of Windows 10 Fall Creators Update (released in October, 2017), the protocol
“SMBv1” for sharing Windows files was disabled. This causes a JaNets PC not to
communicate with any mounter or dispenser described above: it cannot obtain the status or
download/upload data from/to such a machine.
[Corrective action]
Enable “SMBv1” at the JaNets PC (Windows 10). Note that any machine other than those
described above operates normally, so you must not perform this operation for such a machine.
Click “Windows System,” from the start menu of Windows 10, and then “Control Panel.”