JANETS_INM.pdf - 第454页
J aN et s Instr ucti on M anua l 9. Tact S imul at ion 9- 12 “Re sul t an d Lo g” S cree n 9.4 Af ter c ompl etion of s im ulati on, a r esult log is di sp layed on the scr een. Figur e 9.4 -1 “Resul t an d Log” screen T…
JaNets Instruction Manual 9. Tact Simulation
9-11
Example of the printed text when you select “Details (Each Machine)” and 9.3.3.1.4
“Each Component”
Figure 9.3-11 Printed text when you select “Details (Each Machine)” and “Each Component”
Example of the printed text when you select “Details (Each Machine)” and 9.3.3.1.5
“Each Step”
Figure 9.3-12 Printed text when you select “Details (Each Machine)” and “Each Step”
Data on each component used on one
PWB is output for each machine.
Data on each step of one PWB is
output for each machine.
JaNets Instruction Manual 9. Tact Simulation
9-12
“Result and Log” Screen 9.4
After completion of simulation, a result log is displayed on the screen.
Figure 9.4-1 “Result and Log” screen
The simulation result is classified into the following panels and displayed: “Line Total,”
“Machine,” “Details – Machine – Component” and “Details – Machine – Step.” When
you click the “+” on the left side of each panel, the corresponding panel opens to
display its data. When you click the “-,” the corresponding panel closes. Specify the
panel(s) to be displayed by default on the “Set Environments” screen (see Section
9.3.2 “Setting the environment”).
JaNets Instruction Manual 9. Tact Simulation
9-13
Result log (Line Total) 9.4.1
The result and log of simulation of the entire line are displayed on this screen.
Figure 9.4-2 Result log (Line Total) screen
Result log (overall – machine) 9.4.2
The result and log of simulation of each machine are displayed on this screen.
Figure 9.4-3 Result log (overall – machine) screen
Machine selection tab: Allows you to
select a machine whose simula-
tion result and log are to be dis-
played.
Produced: Displays the number
of simulated PWBs.
Mode: Displays the simulation
mode.
Produced: Displays the number
of simulated PWBs.
Mode: Displays the simulation
mode.