00191025-01.pdf - 第125页
SIPLACE 80S/F/G User’s Manual 5 Placement Edition 12/96 from S oftware Version SR.009.xx 5.8 Emergency Stop Processing (P artial Assembly) 5 - 49 5.8 Emergency Stop Processing (Partial Assembly) Emerge ncy stop pr ocessi…
5 Placement SIPLACE 80S/F/G User’s Manual
5.7 Display Functions Edition 12/96 from Software Version SR.009.xx
5 - 48
5.7.2 Confirm Errors
In the menu "Confirm errors" errors which are displayed on the main screen can be deleted.
In the main menu use the cursor keys to select the menu item "Confirm errors". Next press the
return key
.
The errors displayed on the screen will be deleted.
The deleted error does, however, remain in the corresponding menu "Display errors" which is described in
Section 5.7.1.
SIPLACE 80S/F/G User’s Manual 5 Placement
Edition 12/96 from Software Version SR.009.xx 5.8 Emergency Stop Processing (Partial Assembly)
5 - 49
5.8 Emergency Stop Processing (Partial Assembly)
Emergency stop processing prevents errors in the final assembly of the board.
These incompletely assembled boards are usually due to:
-
the emergency stop button being pressed during placement
-
opening the guard during placement.
In these cases placement is interrupted in a way which overrides any machine control and thus it cannot be
determined whether, for example, the last component was still inserted or whether it was rejected.
If the emergency stop button is pressed during placement or the guard opened, the following message will be
displayed.
Fig. 5.8.1
SI 80 V 9.x
Component feeding Display errors
Confirm errors
Machine options
Error
State
Action
:
:
:
Continue processing
Abort processing
Illegal stop
5 Placement SIPLACE 80S/F/G User’s Manual
5.8 Emergency Stop Processing (Partial Assembly) Edition 12/96 from Software Version SR.009.xx
5 - 50
5.8.1 Continuing Placement
●
If the station is ready again and you wish to continue placement, select the menu item "Continue place-
ment".
The following warning will be displayed.
Fig. 5.8.2
●
Check the board in the station for completeness and for displacement of components.
●
Press the space bar.
●
The previous menu will drop down. Select once again the menu item "Continue placement".
Placement of the board will be completed and it will be transported to the delivery point of the
corresponding station.
The following message will be issued.
SI 80 V 9.x
Component feeding Display errors
Confirm errors
Machine options
Error
State
Action
:
:
:
This PCB possibly not being processed correctly!
At end check completeness and position
WARNING
Press space bar