00191025-01.pdf - 第658页
SIPLACE 80S/F/G User’s Manual 19 Error Message s Edition 12/96 from S oftware Version SR.009.xx 19.1 Error Messages 19 - 71 560 Error during ope ration nozzle head contr ol SP head CAUSE ● Er ror in pro gram run In the m…
19 Error Messages SIPLACE 80S/F/G User’s Manual
19.1 Error Messages Edition 12/96 from Software Version SR.009.xx
19 - 70
554 Communication between SR and MC interrupted
CAUSE
●
Hardware fault in a module (M18, M34) or a wiring fault.
REMEDY
●
Replace modules; check the wiring at the back of the control unit.
555 Option nozzle changer IC head not set
CAUSE
●
The nozzle-changer was called without this option being set in the line computer.
REMEDY
●
Configure the nozzle-changer in the line computer.
556 Nozzle type not available
CAUSE
●
During nozzle changing or pick-up a nozzle type was demanded which lies outside the valid range.
REMEDY
●
Check the cluster and set-up.
557 Nozzle type not in set-up nozzle changer IC head
CAUSE
●
The nozzle type required was not included in the nozzle-changer set-up
REMEDY
●
Modify nozzle-changer set-up.
558 Error during MVS initialization via HS3L
CAUSE
●
Wiring of HS3L interface faulty; MVS card not inserted correctly in control unit.
REMEDY
●
Check HS3L wiring; check seating of the MVS card.
559 Data error in MC: Indices for optical centering not O.K.
CAUSE
●
The job data are inconsistent.
REMEDY
●
Check the camera records in the REAL.MA file; check the job data (GF data) in the line computer.
SIPLACE 80S/F/G User’s Manual 19 Error Messages
Edition 12/96 from Software Version SR.009.xx 19.1 Error Messages
19 - 71
560 Error during operation nozzle head control SP head
CAUSE
●
Error in program run
In the menu "General errors" the following applies to Info1:
Info1 = 1 Setting up not necessary
Info1 = 2 Magazine no. invalid
Info1 = 3 Segment no. invalid
Info1 = 4 Garage not found
REMEDY
●
Notify AUT 5 V Service Department
561 Modify nozzle changer SP head
CAUSE
●
The corresponding nozzle type has not been set up in the nozzle-changer
REMEDY
●
Modify nozzle-changer set-up in accordance with required specification and confirm in the menu
with the return key.
562 Error while loading GF geom. description data into MVS
CAUSE
●
Camera records in real.ma are erroneous; old MVS Eprom version; GF description (line computer)
erroneous; incorrect sensor system type input at line computer
REMEDY
●
Check camera records (real.ma); check Eprom MVS version
563 Error while loading GF meas. conditions data into MVS
CAUSE
●
Erroneous manipulation of measuring conditions (test vision system / component; “Rucksack” file
from line computer faulty (part of GF file which can be manipulated)
REMEDY
●
Undo manipulation; delete “Rucksack” file in the line computer or assign new GF number
564 Error during deletion of fiducials in MVS
CAUSE
●
Cannot occur
REMEDY
●
19 Error Messages SIPLACE 80S/F/G User’s Manual
19.1 Error Messages Edition 12/96 from Software Version SR.009.xx
19 - 72
565 Error during loading of fiducials into MVS
CAUSE
●
Fiducial data from the line computer or station computer disk are erroneous; incorrect MVS Eprom
version
REMEDY
●
Delete fiducial data and teach them again; check MVS Eprom version
566 Error while loading fiducial centering param. into MVS
CAUSE
●
Fiducial data from the line computer or station computer disk are erroneous; incorrect MVS Eprom
version
REMEDY
●
Delete fiducial data and teach them again; check MVS Eprom version
567 Error while loading coplanarity data into module
CAUSE
●
Coplanarity has been selected for BGAs; erroneous GF description in the line computer
REMEDY
●
Deactivate coplanarity option; check GF description
568 Error while loading parameter pool into MVS
CAUSE
●
Erroneous data in the SST.ma file; incorrect MVS Eprom version
REMEDY
●
Check the SST.ma file; check the MVS Eprom version
569 Limited conveyor position recognition
CAUSE
●
Conveyor fiducials are outside the travel range of the main axes
REMEDY
●
Set conveyor up for locations which lie within the travel range of the board camera
570 Nozzle not picked up from <Magazine/garage>:
CAUSE
●
Garage indicated of the magazine in question is already empty; x, y or z positions are not correct
(real.ma)
REMEDY
●
Set magazine full; check the garage in question