00191025-01.pdf - 第172页

6 Single Functi ons SIPLACE 80S/F/G User’s Manual 6.6 Head Functions 80 F Edition 07/97 from Software Vers ion SR.010.xx 6 - 40 Fig. 6. 6.1 6.6. 1.1 He ad Reference Run Upon acti vation of t his functio n the z and d a x…

100%1 / 736
SIPLACE 80S/F/G User’s Manual 6 Single Functions
Edition 07/97 from Software Version SR.010.xx 6.6 Head Functions 80 F
6 - 39
6.6 Head Functions 80 F
The head functions of the SIPLACE 80F are for the most part identical with the head functions of the
SIPLACE 80S. The SIPLACE 80F is equipped with one gantry upon which one IC head and one revolver head
are mounted. In Section 6.6 "Head Functions 80 F" only the additional gantry functions of the SIPLACE 80F
are treated. Differences can exist in the software version notice and also in the header of the screen menus.
This does not however have any influence on the functions.
For all other head functions reference will be made in this section to Section 6.3 "Star Head Functions 80S" of
the SIPLACE 80S information.
If at a later point in time function changes or additions are made which affect the SIPLACE 80 S Section 6.6
"Head Functions 80 F" will be revised accordingly.
6.6.1 Menu IC head
In the menu "IC head" it is possible to run individually the functions relating to the head, e.g. head reference
run, return nozzle, vacuum test.
NOTE
If the protective cover is open the head functions can only be run with the key-operated switch turned. When
the menu "IC head" is quit, the IC head and revolver head move to over the reject box. For the x/y axes to be
able to move the protective cover must be closed.
To select the menu "IC head" proceed as follows:
●
In the menu "Gantry" with the aid of the
cursor keys
position the cursor bar over the menu item
"IC head".
●
Press the
Return key
. The screen then displays the menu "IC head".
NOTE
Which nozzle is located at the IC placement head will always be displayed.
6 Single Functions SIPLACE 80S/F/G User’s Manual
6.6 Head Functions 80 F Edition 07/97 from Software Version SR.010.xx
6 - 40
Fig. 6.6.1
6.6.1.1 Head Reference Run
Upon activation of this function the z and d axes perform a reference run.
To launch the function "Head reference run" proceed as follows:
●
In the menu "IC head" with the aid of the
cursor keys
position the cursor bar over the menu item "Head ref-
erence run".
Press the
Return key
. The z-and d axes will perform a reference run.
6.6.1.2 Vacuum Test
Upon activation of this function the vacuum and the height of nozzle which is at the head are measured. There
must be one nozzle at the head.
To implement this function proceed as follows:
●
In the menu "IC head" with the aid of the
cursor keys
position the cursor bar over the menu item
"Vacuum test."
Press the
Return key
. The vacuum value and the height of the current nozzle will be measured. The measured
value of the vacuum is displayed in the righthand window of the menu "IC head".
SI 80F V 10.x
Rüstung :
Display errors
Confirm errors
Machine options
Software options Vision system
Error
State
Action
:
:
:
Single functions
Transportfkt.
Gantry
IC head
Head reference run
Vacuum test
Clamping Z axis
Vacuum Off
Blow out Off
Turn D axis
Return nozzle
Blow out On
Pick-up nozzle
Nozzle changer set-up
Current nozzle number: 416
Single functions
Vacuum On
Single functions
SIPLACE 80S/F/G User’s Manual 6 Single Functions
Edition 07/97 from Software Version SR.010.xx 6.6 Head Functions 80 F
6 - 41
Fig. 6.6.2
SI 80F V 10.x
Rüstung :
Display errors
Confirm errors
Machine options
Vision system
Error
State
Action
:
:
:
Single functions
Breitenverstell.
Gantry
Prüfgerät
Pipettenkonf.
IC head
Current nozzle number:
Vacuum values open:
Single functions
416
25 %
Software options
Single functions
Head reference run
Turn D axis
Vacuum On
Vacuum Off
Blow out On
Blow out Off
Return nozzle
Pick-up nozzle
Nozzle changer set-up
Vacuum test