00191025-01.pdf - 第708页

SIPLACE 80S/F/G User’s Manual 19 Error Message s Edition 12/96 from S oftware Version SR.009.xx 19.1 Error Messages 19 - 1 21 1092 X axis error: limit swit ch actuated CAUSE ● The axis is locate d at the li mit switc h o…

100%1 / 736
19 Error Messages SIPLACE 80S/F/G User’s Manual
19.1 Error Messages Edition 12/96 from Software Version SR.009.xx
19 - 120
1086 Y axis error: undefined position type
CAUSE
●
Software error; should not occur
An incorrect or invalid positioning type has been specified in the machine data
REMEDY
●
Check machine data
1087 xk axis error: undefined position type
CAUSE
●
Software error; should not occur
An incorrect or invalid positioning type has been specified in the machine data
REMEDY
●
Check machine data
1088 yk axis error: undefined position type
CAUSE
●
Software error; should not occur
An incorrect or invalid positioning type has been specified in the machine data
REMEDY
●
Check machine data
1089 z axis error; GU1: undefined position type
CAUSE
●
Software error; should not occur
An incorrect or invalid positioning type has been specified in the machine data
REMEDY
●
Check machine data
1090 z axis error; GU2: undefined position type
CAUSE
●
Software error; should not occur
An incorrect or invalid positioning type has been specified in the machine data
REMEDY
●
Check machine data
1091 z axis error; GU3: undefined position type
CAUSE
●
Software error; should not occur
An incorrect or invalid positioning type has been specified in the machine data
REMEDY
●
Check machine data
SIPLACE 80S/F/G User’s Manual 19 Error Messages
Edition 12/96 from Software Version SR.009.xx 19.1 Error Messages
19 - 121
1092 X axis error: limit switch actuated
CAUSE
●
The axis is located at the limit switch or limit switch was actuated
REMEDY
●
Slide the axis away from the limit switch and re-reference; switch the machine off and back on again
1093 Y axis error: limit switch actuated
CAUSE
●
The axis is located at the limit switch or limit switch was actuated
REMEDY
●
Slide the axis away from the limit switch and re-reference; switch the machine off and back on again
1094 xk axis error: limit switch actuated
CAUSE
●
The axis is located at the limit switch or limit switch was actuated
REMEDY
●
Slide the axis away from the limit switch and re-reference; switch the machine off and back on again
1095 yk axis error: limit switch actuated
CAUSE
●
The axis is located at the limit switch or limit switch was actuated
REMEDY
●
Slide the axis away from the limit switch and re-reference; switch the machine off and back on again
1096 z axis error; GU1: limit switch actuated
CAUSE
●
The axis is located at the limit switch or limit switch was actuated
REMEDY
●
Slide the axis away from the limit switch and re-reference; switch the machine off and back on again
1097 z axis error; GU2: limit switch actuated
CAUSE
●
The axis is located at the limit switch or limit switch was actuated
REMEDY
●
Slide the axis away from the limit switch and re-reference; switch the machine off and back on again
1098 z axis error; GU3: limit switch actuated
CAUSE
●
The axis is located at the limit switch or limit switch was actuated
REMEDY
●
Slide the axis away from the limit switch and re-reference; switch the machine off and back on again
19 Error Messages SIPLACE 80S/F/G User’s Manual
19.1 Error Messages Edition 12/96 from Software Version SR.009.xx
19 - 122
1099 X axis error: target position outside of travel range
CAUSE
●
Program error; should not occur
REMEDY
●
1100 Y axis error: target position outside of travel range
CAUSE
●
Program error; should not occur
REMEDY
●
1101 xk axis error: target position outside of travel range
CAUSE
●
Program error; should not occur
REMEDY
●
1102 yk axis error: target position outside of travel range
CAUSE
●
Program error; should not occur
REMEDY
●
1103 z axis error; GU1: target position outside of travel range
CAUSE
●
Program error; should not occur
REMEDY
●
1104 z axis error; GU2: target position outside of travel range
CAUSE
●
Program error; should not occur
REMEDY
●
1105 z axis error; GU3: target position outside of travel range
CAUSE
●
Program error; should not occur
REMEDY
●