00191025-01.pdf - 第340页
SIPLACE 80S/F/G User’s Manual 8 Component Supply Edition 07/97 from S oftware Version SR.010.xx 8.4 Empty Tape Cutter on SIPLACE 80S-15/F3 Automatic Placement Machines 8 - 15 8.4 Empty Tape Cutter on SIPLACE 80S-15/F3 Au…
8 Component Supply SIPLACE 80S/F/G User’s Manual
8.3 Changeable Components Tables Edition 07/97 from Software Version SR.010.xx
8 - 14
SIPLACE 80S/F/G User’s Manual 8 Component Supply
Edition 07/97 from Software Version SR.010.xx 8.4 Empty Tape Cutter on SIPLACE 80S-15/F3 Automatic Placement Machines
8 - 15
8.4 Empty Tape Cutter on SIPLACE 80S-15/F3 Auto-
matic Placement Machines
8.4.1 General
The SIPLACE 80S-5/F3 automatic placement system is equipped with a empty tape cutter at the installation
locations for the two component tables. The empty tape cutter cuts up the waste tape.
The cut pieces of tape drop into the tape container beneath the component table.
●
Empty the tape container on a daily basis.
Fig. 8.4.1 Tape cutter
- Key to Fig. 8.4.1
➀
Cutter wheel
➁
Toothed belt for cutter wheel
➂
Cutting edge
➃
Drive belt
➄
Drive motor
8 Component Supply SIPLACE 80S/F/G User’s Manual
8.4 Empty Tape Cutter on SIPLACE 80S-15/F3 Automatic Placement Machines Edition 07/97 from Software Version SR.010.xx
8 - 16
8.4.2 Inserting the Tape into the Cutter
PLEASE NOTE
On SIPLACE 80S-15/F3 automatic placement systems, only use the tape feeder modules specified for these
machines. The used tape channel which removes the used tape is located upstream of the feeder modules.
●
Insert the tape into the feeder as described in the corresponding section.
●
Guide the used tape into the used tape channel of the cutter as described in Fig. 8.4.2.
Fig. 8.4.2 Tape infeed of tape cutter
- Key to Fig. 8.4.2
➀
Used tape channel
➁
Used tape
➂
Tape feeder module
➃
To tape cutter