00191025-01.pdf - 第342页

SIPLACE 80S/F/G User’s Manual 8 Component Supply Edition 07/97 from S oftware Version SR.010.xx 8.5 Reel Container (New Gro up) 8 - 17 8.5 Reel Containe r (New Grou p) 8.5.1 General Information Tapes with a reel d iamete…

8 Component Supply SIPLACE 80S/F/G User’s Manual

8.4 Empty Tape Cutter on SIPLACE 80S-15/F3 Automatic Placement Machines Edition 07/97 from Software Version SR.010.xx

8 - 16

8.4.2 Inserting the Tape into the Cutter

PLEASE NOTE

On SIPLACE 80S-15/F3 automatic placement systems, only use the tape feeder modules specified for these

machines. The used tape channel which removes the used tape is located upstream of the feeder modules.

●

Insert the tape into the feeder as described in the corresponding section.

●

Guide the used tape into the used tape channel of the cutter as described in Fig. 8.4.2.

Fig. 8.4.2 Tape infeed of tape cutter

- Key to Fig. 8.4.2

➀

Used tape channel

➁

Used tape

➂

Tape feeder module

➃

To tape cutter

SIPLACE 80S/F/G User’s Manual 8 Component Supply

Edition 07/97 from Software Version SR.010.xx 8.5 Reel Container (New Group)

8 - 17

8.5 Reel Container (New Group)

8.5.1 General Information

Tapes with a reel diameter of 15" can be used.

8.5.2 Overview

Fig. 8.5.1 Reel container - top view

- Key to Fig. 8.5.1

➀

Insertion spindles are allocated to the tape modules

–

The distance between spacers is halved (15.8 mm)

–

Reel diameters of up to 15" can be used

–

Use only 15" reels in the upper slot or seating on the rods

–

Dividing walls are backward-compatible

8 Component Supply SIPLACE 80S/F/G User’s Manual

8.5 Reel Container (New Group) Edition 07/97 from Software Version SR.010.xx

8 - 18

NOTE

With large tape module (> 5") the plug-in axes must be used to ensure that the conveyors are operationally

reliable.

Fig. 8.5.2 Reel container - side view (reel inserted)