00191025-01.pdf - 第557页
15 Software Installation SIPLACE 80S/F/G User’s Manual Edition 12/96 from Software Version S R.009.xx 15 - 2
SIPLACE 80S/F/G User’s Manual 15 Software Installation
Edition 12/96 from Software Version SR.009.xx
15 - 1
15 Software Installation
15 Software Installation SIPLACE 80S/F/G User’s Manual
Edition 12/96 from Software Version SR.009.xx
15 - 2
SIPLACE 80S/F/G User’s Manual 15 Software Installation
Edition 12/96 from Software Version SR.009.xx 15.1 Station Computer Software Version from 8.x
15 - 3
15.1 Station Computer Software Version from 8.x
15.1.1 General
The SIPLACE software is installed using an installation program which carries out the entire installation proce-
dure automatically. In addition, various functions (Save and Reset the machine data, Language and IEC bus
address) can be executed independently of installation.
The installation program for the SIPLACE 80S consists of 3 diskettes (#1/ #2/ #3).
The installation program for the SIPLACE 80F consists of 3 diskettes (#1/ #2/ #3).
The installation program for the SIPLACE G consists of 2 diskettes (#1/ #2).
15.1.2 Installation Sequence
●
Insert diskette #1 into drive A of the station computer.
●
Boot the computer.
The following screen will appear:
Fig. 15.1.1
●
If you wish to abort installation, press the Esc key.
●
Press any key to continue with the installation.
The following screen will appear:
INSTALL sublicense:
The installation program used to install "SIPLACE software",
Install is licensed software provided by Knowledge Dynamics Corp. P. O.
Box .....................
Press [Esc] to quit, any other key to continue