00191025-01.pdf - 第518页
SIPLACE 80S/F/G User’s Manual 10 SIPLACE G Edition 07/97 from S oftware Version SR.010.xx 10.7 Single Functions 10 - 51 ● Set glueing point ● In the me nu "Glu eing unit" m ove the c ursor bar by me ans of the …
10 SIPLACE G SIPLACE 80S/F/G User’s Manual
10.7 Single Functions Edition 07/97 from Software Version SR.010.xx
10 - 50
●
Display filling level
●
In the menu "Glueing unit" move the cursor bar by means of the
cursor keys
onto the menu item
"Display filling level".
●
Press the
Return key
.
The display field of the menu window will show the current filling level (see following menu window).
1 = glue cartridge full
0 = glue cartridge empty
●
Display actual temperature
●
In the menu "Glueing unit" move the cursor bar by means of the
cursor keys
onto the menu item
"Display actual temperature".
●
Press the
Return key
.
In the display field of the menu window the current temperature ( in °C ) of the cartridge will be displayed (see
following menu window).
Fig. 10.7.8
SI 80G V 10.x
Display errors Machine options
Software options
Vision system
Error
State
Action
:
:
:
Single functions
Single functions
Gantry
Glueing unit 1
New cartridge
Continuous glueing
Set glueing point
Display actual temp.
Display filling level
Set glueing point
Glue spot check
Filling level OK 1
Temperature [°C] 35.8
SIPLACE 80S/F/G User’s Manual 10 SIPLACE G
Edition 07/97 from Software Version SR.010.xx 10.7 Single Functions
10 - 51
●
Set glueing point
●
In the menu "Glueing unit" move the cursor bar by means of the
cursor keys
onto the menu item "Set
glueing point".
●
Press the
Return key
.
The menu "Set glueing point" will then be opened.
Fig. 10.7.9
●
Type in a glueing size and press the
Return key
. The minimum and maximum limits of the glueing unit
to be set up will be checked.
●
Use the Esc key to quit the menu "Set glueing point".
●
Glue Spot Check
●
In the "Dosing unit" menu bring the cursor bar over the menu item "Glue spot check" with the aid of the
cursor keys.
●
Press the
Return key
.
●
Glue spots will be placed on the wiper roll. The component camera will check the glue spots and
determine a correction value for the vacuum adaptation. This value is displayed and saved under
"Adapt glue spot volume" and the previous value overwritten.
●
Use Esc to quit the "Set glue spot" menu.
10.7.4.5 Glueing Parameters
The menu "Glueing parameters" is described in Section 10.4.1.
SI 80G V 10.x
Cluster:
Display errors
Confirm errors
Machine options
Software options
Vision system
Error
State
Action
:
:
:
Single functions
Single functions
Gantry
Glueing unit 1
Set glueing point
Glueing size: XX
Esc.: abort
10 SIPLACE G SIPLACE 80S/F/G User’s Manual
10.7 Single Functions Edition 07/97 from Software Version SR.010.xx
10 - 52
10.7.4.6 Paper Feed Cleaning Pad
●
In the menu "Gantry" move the cursor bar by means of the
cursor keys
onto the menu item "Paper feed
cleaning pad".
●
Press the
Return key
.
The cleaning pad will perform a defined paper feed.
10.7.4.7 Cleaning Pad Cycle
●
In the menu "Gantry" move the cursor bar by means of the
cursor keys
onto the menu item "Cleaning pad
cycle".
●
Press the
Return key
.
The glueing head moves to over the cleaning pad and with all 3 glueing units sets the glueing points onto the
cleaning pad. The glueing head then moves out of the area of the cleaning pad.
10.7.5 Transport
The single transport functions for the SIPLACE G are identical to the transport functions of the SIPLACE 80.
For the menu "Transport", see Section 6.4 "Transport Functions 80S" or 80F.