00191025-01.pdf - 第167页
SIPLACE 80S/F/G User’s Manual 6 Single Functions Edition 07/97 from S oftware Version SR.010.xx 6.4 Transport Functions 80S 6 - 35 Fig. 6.4.4 You can return to the menu "Tr ansport" by us ing the Esc key . CAUT…
6 Single Functions SIPLACE 80S/F/G User’s Manual
6.4 Transport Functions 80S Edition 07/97 from Software Version SR.010.xx
6 - 34
NOTE
The input conveyor belt is run only at high speed.
Fig. 6.4.3
●
When you have completed this check, press the
Esc key
. The conveyor belts are switched off and the
program returns to the menu "Conveyor speed".
6.4.8 Menu "Width adjustment"
The function "Width adjustment" is required to adjust the conveyor width. The conveyor width must be
adjusted when another board size is introduced and for various maintenance work.
To call the menu "Width adjustment", proceed as follows:
●
Within the menu "Single functions" use the
cursor keys
to select the menu item "Width adjustment".
●
Press the
Return key
. The "Width adjustment" menu is displayed on the screen.
SI 80 V 10.x
BE - Zuführung Display errors
Confirm errors
Machine options
Software options Vision system
Error
State
Action
:
:
:
Single functions
Transportfkt.
Breitenverstell.
Transport
PCB to center conveyor
Stopper betätigen
Klemmung betätigen
Transp. Lichts. anz.
Bandgeschwindigkeit
niedrige Bandgeschw.
hohe Bandgeschw.
High conveyor speed
Conveyor speed
Please set high conveyor speed
Esc.: abort
Single functions
Single functions
SIPLACE 80S/F/G User’s Manual 6 Single Functions
Edition 07/97 from Software Version SR.010.xx 6.4 Transport Functions 80S
6 - 35
Fig. 6.4.4
You can return to the menu "Transport" by using the
Esc key
.
CAUTION
∆
!
Make sure before beginning width adjustment that there are no boards or objects in the conveyor area,
otherwise the machine and the boards could be damaged!
●
Use the
spacebar
to select the speed. You have the possibility of choosing between high and low speed.
The active speed is displayed on the top line of the menu "Adjust with motor".
●
To change the conveyor width press one of the
cursor keys
. Pressing the up arrow key increases the con-
veyor width. Pressing the down arrow key decreases the conveyor width.
●
Once you have set the desired transport width quit the menu "Adjust with motor" by pressing the
Esc key
.
NOTE
After width adjustment has been carried out, the lefthand portal performs a search run, after the menu "Adjust
with motor" has been quit, to determine the conveyor width.
The transportation width measured will be displayed in mm in the "Conveyor width" menu in the right-hand dis-
play box.
SI 80 V 10.x
Display errors
Confirm errors
Machine options
Software options
Vision system
Errorr
State
Action
:
:
:
Single functions
Transportfkt.
Breitenverstell.
Transport
Width adjustment: low conveyor speed
Esc.: abort Blank: spd. change
Adjust PCB transport width with motor
Single functions
Adjust with motor
: larger : smaller
Single functions
6 Single Functions SIPLACE 80S/F/G User’s Manual
6.4 Transport Functions 80S Edition 07/97 from Software Version SR.010.xx
6 - 36
6.4.9 Measuring the Conveyor Width
●
Use the cursor keys to select the menu item "Measure conveyor width" in the "Conveyor functions" menu.
The conveyor width will be measured and stored.