00191025-01.pdf - 第354页
SIPLACE 80S/F/G User’s Manual 8 Component Supply Edition 07/97 from S oftware Version SR.010.xx 8.7 Support for Flatpack Magazine (Manual Tray Support) 8 - 29 8.7 Support for Flatpack Magazine (Manual T ray Sup port) PLE…
8 Component Supply SIPLACE 80S/F/G User’s Manual
8.6 Wafflepack Changer Edition 07/97 from Software Version SR.010.xx
8 - 28
SIPLACE 80S/F/G User’s Manual 8 Component Supply
Edition 07/97 from Software Version SR.010.xx 8.7 Support for Flatpack Magazine (Manual Tray Support)
8 - 29
8.7 Support for Flatpack Magazine
(Manual Tray Support)
PLEASE NOTE
The manual tray holder must only be placed on the right side of the SIPLACE 80F. The tray holder can only be
positioned so that the right edge covers no more than track 73.
8.7.1 General
With the support for flatpack magazines components can be picked up from individual flatpack magazines.
The flatpack magazines are changed by hand.
The support for flatpack magazines is positioned on the component table like a conveyor.
There are two different versions of the support which differ in their width.
Support for large flatpack magazine (260 mm) Item No. 00116430-01
Support for small flatpack magazine (136 mm) Item No. 00116432-01
8.7.2 Installation
●
Insert the front side of the manual tray rest into the associated centering pin (B in Fig. 8.7.1).
●
Position the rear of the manual tray rest into the spherical cap on the component table (A in Fig. 8.7.1).
●
Make sure the manual tray rest is resting securely on the components table.
●
Position one side of the flatpack magazine carrier in the mounting (C in Fig. 8.7.1) and press the other side
into the mounting (D in Fig. 8.7.1).
●
Slide the flatpack magazine up against the stop (E in Fig. 8.7.1).
●
Secure the flatpack magazine carrier by pressing the clamp downwards (F in Fig. 8.7.1).
●
To remove the flatpack magazine carrier press the clamp once more.
NOTE
With the "mounting for small flatpack magazine" (136 mm) a flatpack magazine (JEDEC or CENELEC flatpack
magazines) can be fitted directly to the mounting, in other words, without a flatpack magazine carrier being
used. The clamp will however need changing.
8.7.2.1 Changing the Clamp
●
Hold the retainer firmly (G in Fig. 8.7.1). Press the clamp (F in Fig. 8.7.1) downwards and remove the
retainer by pressing it out sideways.
8 Component Supply SIPLACE 80S/F/G User’s Manual
8.7 Support for Flatpack Magazine (Manual Tray Support) Edition 07/97 from Software Version SR.010.xx
8 - 30
Fig. 8.7.1 Installation/removal
- Key to Fig. 8.7.1
➀
Centering pins
➁
Magnetic rail
➂
Spherical caps
8.7.3 Data Input
Define the flatpack magazines as described in the SIPLACE UNIX line computer UNIX user's manual.
❒