00191025-01.pdf - 第369页

9 Maintenance SIPLACE 80S /F/G User’s Manual 9.1 Overview Edition 07/97 from S oftware Version SR.010.xx 9 - 10

100%1 / 736
SIPLACE 80S/F/G User’s Manual 9 Maintenance
Edition 07/97 from Software Version SR.010.xx 9.1 Overview
9 - 9
9.1.5.2 List of Materials Required for Maintenance of the SIPLACE 80F Machine
The lists of materials required for maintenance of the SIPLACE 80S placement machine also apply to the
SIPLACE 80F. In addition you will need:
9.1.5.3 List of Materials Required for Maintenance of the SIPLACE G Adh. Appl.
Machines
For maintenance of the SIPLACE G adhesive application machine you will additionally require the tools and
equipment listed below:
Consumables Item number
Cloth, lint-free
Ethyl alcohol
Filter mat 230 x 360 00315209-01
Segment maintenance cloth 00315253-01
Soapy water
Staburags N12 lubrication grease 02100611-01
Tissue
Unimoly GL 82 00310282-01
Unisilkon L250L 00310259-01
Urethyn E/M2, grease cartridge 02101696-01
Watchmaker’s oil, 5 ml 02100393-01
WD 40 anti-corrosive agent 00325833-01
Tab. 9.1.2 Consumables required for maintenance of the SIPLACE 80S placement machine
Tools and equipment Item number
Change-over table lifting cart HS/SP/WPW/SIPLACE 80 00123141-01
Nozzle removal tool 00311448-01
Tab. 9.1.3 Additional tools and equipment required for maintenance of the SIPLACE 80F placement machine
Consumables
Lens cleaning cloth, moisture-sealed pack
Lens cleaning tissue (from Kodak, for example)
Talcum
Tab. 9.1.4 Additional consumables required for maintenance of the SIPLACE 80F placement machine
Tools, Equipment Item number
Cleaning bolt 00308575-06
Universal ultra-sonic cleaning bath 02102349-01
Tab. 9.1.5 Tools and equipment required for maintenance of the SIPLACE G adhesive application machine
9 Maintenance SIPLACE 80S/F/G User’s Manual
9.1 Overview Edition 07/97 from Software Version SR.010.xx
9 - 10
SIPLACE 80S/F/G User’s Manual 9 Maintenance
Edition 07/97 from Software Version SR.010.xx 9.2 Maintenance Schedules
9 - 11
9.2 Maintenance Schedules
9.2.1 Basic Maintenance Schedule for the SIPLACE 80S and 80F
Module Subassembly To be carried out after each shift Equipment
Date
done
Machine base Rejects container Empty; vacuum area Vacuum cleaner
Empty tape
cutter
Waste container Empty; vacuum area Vacuum cleaner
Segments
(revolver head)
Plastic nozzle
Check for damage,
replace, if necessary
Nozzle
changer for
revolver head
Vacuum clean Vacuum cleaner
Tab. 9.2.1 Basic maintenance schedule for the SIPLACE 80S and 80F:To be carried out after each shift
Module Subassembly
To be carried out every week
(15 / 17 shifts)
Equipment
Date
done
Gantry
Ball tracks
Clean, apply a small amount of
grease with a cloth
Staburags N12
lubrication grease,
lint-free cloth
Friction surfaces outside
travel range
Clean, apply a small amount of oil
with a cloth
Watchmaker’s oil,
lint-free cloth
Friction surfaces inside
travel range
Apply 1 drop of oil to a clean cloth
and wipe off the surface
Watchmaker’s oil,
lint-free cloth
X, Y
measurement
systems
Incremental scales Clean
Ethyl alcohol, lint-
free paper tissue
PCB
conveyor
Conveyor belts Remove components
Vacuum cleaner,
tweezers
Control unit
or servo unit
Filter mats
Clean, replace if necessary,
item no. 00315209-01
Vacuum cleaner
Control unit of
PCB handling
Dust filter Clean Vacuum cleaner
Tab. 9.2.2 Basic maintenance schedule for the SIPLACE 80S and 80F:To be carried out weekly (15 / 17 shifts)