00191025-01.pdf - 第256页
7 Vision Systems S IPLACE 80S/F/G User’s Manual 7.6 Test Component Edition 07/97 from Software Version S R.010.xx 7 - 64 Line engine er
SIPLACE 80S/F/G User’s Manual 7 Vision Systems
Edition 07/97 from Software Version SR.010.xx 7.6 Test Component
Line engineer 7 - 63
Fig. 7.6.1 Flow diagram “Test Component”, Part 1
To
7 Vision Systems SIPLACE 80S/F/G User’s Manual
7.6 Test Component Edition 07/97 from Software Version SR.010.xx
7 - 64 Line engineer
SIPLACE 80S/F/G User’s Manual 7 Vision Systems
Edition 07/97 from Software Version SR.010.xx 7.6 Test Component
Line engineer 7 - 65
7.6.3 Menus “Test component” and “Save GF data”
When the option “Test component” is selected in the menu “Vision system” the following actions are initiated:
●
Once you have entered the GF number, the functions for the vision system are activated in the station com-
puter:
–
The GF data received by the line computer are converted into the MVS-compatible format.
–
The measurement conditions stored in the station computer are loaded with the GF data.
●
The menu “Test component” pops up.
Fig. 7.6.2
The menu offers you, as the diagram shows, the choice of a total of 10 options. Via the option “Edit GF data”
you reach the next level down in the menu “Edit GF data”. After the option "Change measure mode" has been
selected the menu "Change measure mode" opens with its options "Size", "Row", "Corner", "Lead", "Grid" or
"Ball". (The options "Grid" and "Ball" are only available with the 80F placement system.) If you have modified
package form data, the "Save GF data" menu will be overlaid. You have the choice of saving the modified data
or discarding them.
The "Test output" option is intended as a development tool for when you have problems with a package form,
for instance. Print out the test results of optical centering and send the data to the vision system development
group to enable them to be of assistance in finding a solution to the problems. The "Display errors" menu is
described in Section 5.5 "Error menus".
Error
State
Action
Enter package form number
Rüstung:
Single functions
:
:
:
BE - Zuführung
SI80 V 10.x
Vision system
Vision system
Vision system
Version: 2133
Test component
Enter GF number
Pickup component
Display component
Measure component
Test component
Edit GF data
Change measure mode
Refill
Display errors
Test output