00191025-01.pdf - 第158页

6 Single Functi ons SIPLACE 80S/F/G User’s M anual 6.3 Star Head Functions 80S Edition 07/97 from Software Version SR.010.xx 6 - 26 6.3.4.1 Magazine Conf iguration The menu item "Ma gazine c onfigura tion" is u…

100%1 / 736
SIPLACE 80S/F/G User’s Manual 6 Single Functions
Edition 07/97 from Software Version SR.010.xx 6.3 Star Head Functions 80S
6 - 25
6.3.4 Nozzle Changer SP
NOTE
The "Nozzle changer SP" menu can only be executed when a nozzle-changer has been configured (specified
by the line computer).
With the nozzle-changer at the rotating head it is possible to pick up and return nozzles automatically.
Proceed as follows to call the menu item "Nozzle changer SP":
●
In the menu "Star head" use the cursor keys to move the cursor bar over the menu item "Nozzle changer
SP".
●
Press the
Return key
. The screen then displays the menu "Nozzle changer SP".
Fig. 6.3.8
SI 80 V 10.x
Rüstung :
BE - Zuführung Display errors
Confirm errors
Machine options
Software options
Vision system
Error
State
Action
Transportfkt.
Breitenverstell.
Transportfkt.
Breitenverstell.
:
:
:
Nullimpuls anfahren
Portal - Referenzlauf
Kopf
Prüfgerät
Pipettenkonf.
Magazine configuration
Magazine filling level
Replace one nozzle
Return all nozzles
Pickup all nozzles
Remove all nozzles
:
:
:
Single functions
Single functions
Gantry 1
Star head
Nozzle changer SP
Lock open
Lock closed
6 Single Functions SIPLACE 80S/F/G User’s Manual
6.3 Star Head Functions 80S Edition 07/97 from Software Version SR.010.xx
6 - 26
6.3.4.1 Magazine Configuration
The menu item "Magazine configuration" is used for displaying and checking the nozzle sizes in the individual
magazines of the nozzle-changer.
NOTE
If the magazine configurations (actual and desired) do not match, all nozzles will be returned to facilitate
changing and checking of the nozzles.
Proceed as follows to call the menu item "Magazine configuration":
●
In the menu "Nozzle changer SP" use the cursor keys to move the cursor bar over the menu item "Maga-
zine configuration".
●
Press the
Return key
. The screen then displays the menu "Magazine configuration".
Fig. 6.3.9
●
Use the cursor keys to move the cursor bar over the corresponding line.
●
To acknowledge a change in the nozzle occupancy of the nozzle-changer press the
Return key
.
Nozzles which need modifying are highlighted by an arrow below the "Change" column in the menu win-
dow.
NOTE
If a magazine is changed, a full magazine (12 nozzles) must always be inserted.
Esc: abort
Magazine configuration
Error
State
Action
:
:
:
Magazine
No.
2
3
4
5
6
7
Actual
313
314
314
317
0
0
Desired
313
314
315
317
0
0
Nozzle configuration
Ret: accept
change
<=
1 312 313 <=
Single functions
SIPLACE 80S/F/G User’s Manual 6 Single Functions
Edition 07/97 from Software Version SR.010.xx 6.3 Star Head Functions 80S
6 - 27
●
This confirmation is required, when the actual nozzle configuration is not the same as the desired configu-
ration and if the state of the "desired" column is to be taken over into the "actual" column. This new nozzle
configuration is saved to the machine data. Before acknowledgment the nozzles in the corresponding mag-
azine of the nozzle-changer must be changed and there be 12 nozzles.
Once processing is completed, the two columns ("actual" and "desired") must match.
●
Press the Esc key to quit the menu "Magazine configuration".
6.3.4.2 Magazine Filling Level
Proceed as follows to call the menu item "Magazine filling level":
●
In the menu "Nozzle changer SP" use the cursor keys to move the cursor bar over the menu item "Maga-
zine filling level".
●
Press the
Return key
. The screen then displays the menu "Magazine filling level".
NOTE
If there are nozzles in the placement head, these will be returned to the corresponding magazines.
The number of nozzles per magazine cannot thus be greater than 12.
Fig. 6.3.10
NOTE
A magazine can be set up with a maximum of 12 nozzles of the same type.
Esc: abort
Magazine filling level
Error
State
Action
:
:
:
Magazine
No.
1
2
3
4
5
6
7
Actual
312
313
314
314
317
0
0
Filling level
6
4
0
2
12
0
0
Nozzle configuration
Ret.: refill