00191025-01.pdf - 第637页

19 Error Messages S IPLACE 80S/F/G User’s Manual 19.1 Error Mess ages Edition 12/96 from Software Vers ion SR.009.xx 19 - 50 418 FM_FEHLER_6 CAUSE ● Error d uring test ing, signi ficance varies. REMEDY ● 419 FM_FEHLER_7 …

100%1 / 736
SIPLACE 80S/F/G User’s Manual 19 Error Messages
Edition 12/96 from Software Version SR.009.xx 19.1 Error Messages
19 - 49
411 FM_ERSTER_FEHLER
CAUSE
●
Error during testing, significance varies.
REMEDY
●
412 FM_LETZTER_FEHLER
CAUSE
●
Error during testing, significance varies.
REMEDY
●
413 FM_FEHLER_1
CAUSE
●
Error during testing, significance varies.
REMEDY
●
414 FM_FEHLER_2
CAUSE
●
Error during testing, significance varies.
REMEDY
●
415 FM_FEHLER_3
CAUSE
●
Error during testing, significance varies.
REMEDY
●
416 FM_FEHLER_4
CAUSE
●
Error during testing, significance varies.
REMEDY
●
417 FM_FEHLER_5
CAUSE
●
Error during testing, significance varies.
REMEDY
●
19 Error Messages SIPLACE 80S/F/G User’s Manual
19.1 Error Messages Edition 12/96 from Software Version SR.009.xx
19 - 50
418 FM_FEHLER_6
CAUSE
●
Error during testing, significance varies.
REMEDY
●
419 FM_FEHLER_7
CAUSE
●
Error during testing, significance varies.
REMEDY
●
420 FM_FEHLER_8
CAUSE
●
Error during testing, significance varies.
REMEDY
●
421 FM_FEHLER_9
CAUSE
●
Error during testing, significance varies.
REMEDY
●
422 FM_FEHLER_10
CAUSE
●
Error during testing, significance varies.
REMEDY
●
423 Position: Evaluation not possible
CAUSE
●
Component is not positioned properly at the nozzle, or is missing; optical image inadequate.
REMEDY
●
Change the illumination values and / or the LUT.
424 Dimension: Evaluation not possible
CAUSE
●
No component at the nozzle; component outside tolerance; not enough image information to provide
measurement result.
REMEDY
●
Optimize pick-up; check charge (component).
SIPLACE 80S/F/G User’s Manual 19 Error Messages
Edition 12/96 from Software Version SR.009.xx 19.1 Error Messages
19 - 51
425 No. of pins: Evaluation not possible
CAUSE
●
No component at the nozzle; component outside tolerance; not enough image information to provide
measurement result.
REMEDY
●
Optimize pick-up; check charge (component).
426 Colinearity: Evaluation not possible
CAUSE
●
No component at the nozzle; component outside tolerance; not enough image information to provide
measurement result.
REMEDY
●
Optimize pick-up; check charge (component).
427 Spacing: Evaluation not possible
CAUSE
●
No component at the nozzle; component outside tolerance; not enough image information to provide
measurement result.
REMEDY
●
Optimize pick-up; check charge (component).
428 Position: no result
CAUSE
●
Due to a preceding error no result is issued by the vision system.
REMEDY
●
See preceding error.
429 Dimension: no result
CAUSE
●
Due to a preceding error no result is issued by the vision system.
REMEDY
●
See preceding error.
430 No. of pins: no result
CAUSE
●
Due to a preceding error no result is issued by the vision system.
REMEDY
●
See preceding error.