SG_FSE_SiplaceHF_HF3_00193901-05_eng.pdf - 第250页

1 - 50 S tudent Guide SIPLACE HF/HF3 6 Collect &Place-He ad / DLM2 Edition 09/2005 50 Description LED‘S and DIP switches on the Headinterface: 6 LED 1-7 (functional check) – SPI - Serial parallel interface (A /D or D…

100%1 / 596
1 - 49
Student Guide SIPLACE HF/HF3
Edition 09/2005 6 Collect &Place-Head / DLM2
49
6.4 Adjustments
6.4.1 Description of the switches and PCB boards on the C&P head
6.4.1.1 Head interface
The same head interface board will be use on Gantry 1 and Gantry 2 for the twin head and C&P
head.
Fig. 6.4 - 1 Headinterface
1. X11 Connector Temperature sensor X-Axis
2. X17 Connector BERO Travel range X-Axis
3. X16 Connector BERO Travel range X-Axis
4. X15 Connector for incremental encoder X-Axis
5. X24 Test connector digital track signals X-Axis
6. Connector for "16 bit Prozessor board"
LED 1-7 TP 1-8
LED 1-10
DIP Switch
1
2
3
4
5
6
1 - 50
Student Guide SIPLACE HF/HF3
6 Collect &Place-Head / DLM2 Edition 09/2005
50
Description LED‘S and DIP switches on the Headinterface: 6
LED 1-7 (functional check)
– SPI - Serial parallel interface (A/D or D/A converter in future)
– D-ON - Digital ON 5V DC/DC Converter
– H-OK - Head adapter board connected
– C-In - CAN Internal not used
–MRST -Main Reset
– F-UC - not used
– MP - Main Power fail, mean 5 V power supply being missing at the machine (e.g. CAN
Bus)
LED 1-10 (LED´s for voltages)
– Vcc - Power supply +5 V head interface
– N15V - Minus 15 Volt (from the Axis unit--> Error--> LED red)
– P3,3V - Not used
– P15V - Plus 15 Volt (from the Axis unit--> Error--> LED red)
– P24V - 24 Volt power supply (e.g.stepper motor)
– AV ER - Not used
–EN AN - Not used
– P5V - 5 Volt Power supply track signals X-Axis --> ON Power fail
– VccF - 5 Volt for digital
– TMP - Temperature monitoring X-Axis
Please Note:
The DIP Switch configuration for the gantry configuration is decribed in chapter gantry.
1 - 51
Student Guide SIPLACE HF/HF3
Edition 09/2005 6 Collect &Place-Head / DLM2
51
6.4.1.2 Vision board (analog)
The vision board are connect on the top of the head interface. That board is used on the gantry
with a C&P head and TWIN-head.
Fig. 6.4 - 2 Vision board
1. Connector illumination PCB camera
2. Connector PCB camera
3. LED‘s P15V - 15Volt / Vcc - Power supply Vision board
4. DIP Switch
5. CAN Prozessor 16 Bit (additional board on the Visionboard)
6. DC/DC Converter 15 --> 5V for Visionsystem.
Please Note:
The DIP Switch configuration for the gantry is decribed in chapter gantry .
4
5
1
3
2
6