SG_FSE_SiplaceHF_HF3_00193901-05_eng.pdf - 第348页
1 - 36 S tudent Guide SIPLACE HF/HF3 7 TWIN-Head Edition 09/2005 36 Notes
1 - 35
Student Guide SIPLACE HF/HF3
Edition 09/2005 7 TWIN-Head
35
7.4.8 Mechanical adjustment the incremental encoder Z-axis
Please Note:
The incremental encoder on the Z-Axis must be adjust to a distance of 0,4 mm +/- 0,1 mm to the
incremental scale. Please adjust the incremental encoder parallel to the incremental scale. For the
distance use a plastic feeler gauge of 0,4 mm.
After this adjustment of the incremental encoder you have to check the zero pulse and track sig-
nals (see chapter Tracksignals and Zeropulse).
Notes
1 - 1
Student Guide SIPLACE HF/HF3
Edition 09/2005 7 TWIN-Head
1
7.5 Nozzle changer
7.5.1 Nozzle changer for TWIN- head
Die Siplace HF/HF3 will be delivered with a standard nozzle changer for the twin head. This nozzle
changer can hold up to 12 magazines. There are two types of magazine available: standard mag-
azines and magazines for special nozzles or grippers.
The nozzle changer may be installed depend on the configuration at location 1 and/or 3. The
nozzle changer consist of a standard modul with 3 nozzle holders two standard nozzles and one
special nozzle or gripper. This configuration could be extended see Fig. 7.5 - 1.There are three
’Standard’ (504) magazine configurations.
Fig. 7.5 - 1 Nozzle changer configuration TWIN- head
(1) Standard-Nozzle changer
(2) Extended Nozzle changer
(3) Complete Nozzle changer
Please Note:
The magazines for standard, and special nozzles are freely configurable with the SW 505 . 7
Transport direction
3
2
1
Magazine for
1 special nozzle
Magazine for 2
standard nozzles