SG_FSE_SiplaceHF_HF3_00193901-05_eng.pdf - 第436页
1 - 8 S tudent Guide SIPLACE HF/HF3 10 Sitest Edition 09/2005 8 7. 8. MT C Ca lls the vie w for th e f unction s of t h e MT C . Ca lls the vie w for th e tow e r f u nc t i ons of t he M T C . C al l s t h e vi ew f or …
1 - 7
Student Guide SIPLACE HF/HF3
Edition 09/2005 10 Sitest
7
4.
5.
6.
Twin Head
Calling up the view for the
functions of the Twin Head.
Calling up the view for the axis
functions of the Twin Head.
Calling up the view for the head
board functions.
Calling up the view for the IC
camera functions.
Calling up the view for the FC
camera functions.
Calls up the view of the
calibration functions for the Twin
Head.
Calling up the view for the
mapping functions of the Twin
Head.
Calls up the view for the head
functions of the nozzle changer
for the Twin Head.
Calls up the view for the
magazine functions of the nozzle
changer for the Twin Head.
PCB-Conveyor
Call-up the Conveyor Functions
view.
Call-up the screen for setting
the conveyor speed.
Call-up of the display of the
conveyor width settings.
Call-up the screen displaying
the PCB transport functions.
Tables
Call-up of the display of the
component table functions.
Call-up of the display for the
calibration of the component
table pick-up position.
1 - 8
Student Guide SIPLACE HF/HF3
10 Sitest Edition 09/2005
8
7.
8.
MTC
Calls the view for the functions
of the MTC.
Calls the view for the tower
functions of the MTC.
Calls the view for the axis
functions of the MTC.
Calls the view for the settings of
the MTC.
Calls the view for the machine
data functions of the MTC.
Calls the view for the inputs/
outputs of the MTC.
Calls the view for the inputs/
outputs of the MTC.
Inputs/Outputs
I/O module 1
I/O module 2
I/O module 3
I/O module 4
I/O module 5
I/O module 6
Lifting table and stopper, conveyor 1
Lifting table and stopper, conveyor 2
Belt motor, sonar Bero and width
adjustment, conveyor 1
Belt motor, sonar Bero and width
adjustment, conveyor 2
Interface, conveyor 1
Interface, conveyor 2
Options, conveyor 1
Options, conveyor 2
Conveyor width adjustment
1 - 9
Student Guide SIPLACE HF/HF3
Edition 09/2005 10 Sitest
9
10.2 Calibration
WARNING
During some of the procedures the gantries will traverse.
Therefore, before you begin with any of these procedures make sure that you and everyone else
stay physically clear of the travel range of the gantries.
RISK OF INJURY!
Also, ascertain, that no objects are in the way. 10
10
Note:
Before you begin with the calibration, you must reference the heads and the gantries.
During calibration, unused gantries will automatically be traversed to their parking position.
For a complete calibration of the placement system, the SITEST test program provides the func-
tion
"Calibrate machine..." which allows you to start all calibration functions from the menu "Calibrate
entire machine".
Calibration functions will be performed for these functions, for gantries 1, and 2. 10
Equipment and Testing Tools
– Test program SITEST, version 504.xx
– Calibration tools
– Nozzles, type 956, 517,518
– Gauge
– PCB, width 100 mm