SG_FSE_SiplaceHF_HF3_00193901-05_eng.pdf - 第29页

1 - 3 S tudent Guide SIPLACE HF/HF3 Edition 09/2005 2 Overview 3 2 Overview 2.1 General The High Flexibility SMD Placement system SIPLACE HF/HF3 is characterized in the configura- tion and through highest accuracy by hig…

100%1 / 596
1 - 2
Student Guide SIPLACE HF/HF3
Contents Edition 09/2005
2
2.2.15.5 Nozzle changer for 6 segment C&P head . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
2.2.16 TwinHead for high accuracy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
2.2.16.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
2.2.16.2 Nozzle changer Twin head. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
2.2.17 Conveyor system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
2.2.17.1 General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
2.2.17.2 Construction single conveyor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
2.2.17.3 Construction dual conveyor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
1 - 3
Student Guide SIPLACE HF/HF3
Edition 09/2005 2 Overview
3
2 Overview
2.1 General
The High Flexibility SMD Placement system SIPLACE HF/HF3 is characterized in the configura-
tion and through highest accuracy by high flexibility. The automat incorporates the entire SMD
component spectrum.
Fig. 2.1 - 1 Overview Siplace HF
Legend:
A new machine version of the HF- and HF3 machine is about 300kg lighter. also a component
table is 20 kg lighter.
(1) Monitor (on both side) (2) Keyboard (on both side)
(3) Location 1 (4) Location 2
(5) Location 3 (6) Location 4
1
1
2
4
3
5
6
1 - 4
Student Guide SIPLACE HF/HF3
2 Overview Edition 09/2005
4
Fig. 2.1 - 2 Overview Siplace HF
Legend:
Two placement methods are used:
–the Collect&Place method with revolver heads for components from size 0201 to fine-pitch
–the Pick&Place method with the SIPLACE TwinHead for fine-pitch and OSC components
The placement machine is based on a torsionally-rigid and vibration-damped cast steel machine
frame. This guarantees an excellent production quality and less environmental pollution for em-
ployees since the noise of shaking and vibration are reduced to a minimum.
The placement machine has two gantries on the HF and three gantries on the HF3. There is a
placement head on each gantry. These can be quickly and accurately positioned by linear motors,
moving independently of one another in the X and Y directions. The following placement head
configuration is currently possible:
Gantry 1
– 12-segment Collect & Place head or -6-segment Collect & Place head or TwinHead (HF)
(7) Monitor (on both side) (8) Keyboard (on both side)
(9) Location 1 (10) Location 2
(11) Location 3 (12) Location 4
1
1
2
4
3
5
6