SG_FSE_SiplaceHF_HF3_00193901-05_eng.pdf - 第4页
1 - 2 S tudent Guide Course Contents Edition 09/2005 2 Course Content s Introduction – General Intr oduction – Curriculum of the cour se – Requirement s of the participant s SIPLACE Safety Considerations – SIPLACE Safety…
1 - 1
Student Guide SIPLACE HF/HF3
Edition 09/2005 Course introduction SIPLACE HF/HF3 Training for FSE‘s
1
Course introduction
SIPLACE HF/HF3 Training for FSE‘s
This documentation will lead you through the SIPLACE HF/HF3 training for FSE‘s.
Course duration: 10 Days
Prerequisites
SIPLACE S25HM / HS-50 Training
SIPLACE Pro Programming Training
FSE Laptops with executable Service Tools
Target Group
SIPLACE service personnel
SIPLACE setup engineers
Course Objectives
The participants know the different parts of a SIPLACE HF/HF3 and their specific function. They
are able to operate the SITEST software, can perform parts replacement according to spare parts
definition and following adjustments as well as a machine calibration. They understand the func-
tional relations and the machine principles in detail and can thus locate and eliminate machine er-
rors. He can perform the head modularity and knows the MTC2 option on the SIPLACE HF/HF3.
1 - 2
Student Guide
Course Contents Edition 09/2005
2
Course Contents
Introduction
– General Introduction
– Curriculum of the course
– Requirements of the participants
SIPLACE Safety Considerations
– SIPLACE Safety Instructions
– Safety equipment
– Energy state and residual voltages after switching off the main switch
– Disabling the compressed air Supply
– ESD guidelines
Machine overview
– Overall View
– Machine options
– Power supply and pneumatic, cage, Axis and computer unit
– Placement heads and nozzle changer
– Feeder tables and tape cutter
– Control structure
Machine Reference Run
Demonstration and explanation of a reference run
Placement Sequence
– Demonstration and explanation the placement sequence
– Pick-up and placement cycle of the C&P head
– Pick up and placement cycle of the Twin head
Communication and control
– Overview Network and Network addresses
– LAN Network
– Communication on the HF/HF3 machine
– CAN Bus communication Axis control and vision system
– General overview track signals and axis dynamic SIPLACE-LAN
1 - 3
Student Guide SIPLACE HF/HF3
Edition 09/2005 Course Contents
3
Services to the machine
– Explanation of the units and parts in the power supply cage and pneumatic cage
– Explanation of the function of the parts in the sectors
Gantry
– General setup and functionality of the gantry ,mechanical structure of the X- and Y-Axes
– Spare part replacement and adjustment work at the gantry axis
– Axis controlling and positioning of the gantry axis
Collect & Place head
– General Overview
– Removing the front part of the C&P head
– Overview front part of the head
– Dis- and reassembly of spare parts at the front part
– Spare part replacement on the head back part
– Vacuum system
– Explanation of vacuum- / air blow system
– Remount C&P head
– Adjustment of the air blow at reject and placement circuit
– Adjustment of the zero point correction star axis
– Axis controlling and positioning of the star axis
– Axis controlling and positioning of the Z-axis
– Axis controlling and positioning of the DP-axis
– Differentiation between DLM1 and DLM2 C&P placement heads
Twin Head
– Position and environment of the Twin head
– Structure and functional groups of the Twin head
– Disassembly and assembly of the Twin head
– Spare part replacement and adjustments at the Twin head
– Axis controlling and positioning of the twin head axis
– Vacuum system
– Axis controlling and positioning of the Z-axis
– Axis controlling and positioning of the D-axis