SG_FSE_SiplaceHF_HF3_00193901-05_eng.pdf - 第349页
1 - 1 S tudent Guide SIPLACE HF/HF3 Edition 09/2005 7 TWIN-Head 1 7.5 Nozzle changer 7.5.1 Nozzle changer for TWIN- head Die Siplace HF/HF3 will be deliver ed with a standard nozzle changer for the twin head. This nozzle…
1 - 1
Student Guide SIPLACE HF/HF3
Edition 09/2005 7 TWIN-Head
1
7.5 Nozzle changer
7.5.1 Nozzle changer for TWIN- head
Die Siplace HF/HF3 will be delivered with a standard nozzle changer for the twin head. This nozzle
changer can hold up to 12 magazines. There are two types of magazine available: standard mag-
azines and magazines for special nozzles or grippers.
The nozzle changer may be installed depend on the configuration at location 1 and/or 3. The
nozzle changer consist of a standard modul with 3 nozzle holders two standard nozzles and one
special nozzle or gripper. This configuration could be extended see Fig. 7.5 - 1.There are three
’Standard’ (504) magazine configurations.
Fig. 7.5 - 1 Nozzle changer configuration TWIN- head
(1) Standard-Nozzle changer
(2) Extended Nozzle changer
(3) Complete Nozzle changer
Please Note:
The magazines for standard, and special nozzles are freely configurable with the SW 505 . 7
Transport direction
3
2
1
Magazine for
1 special nozzle
Magazine for 2
standard nozzles
1 - 2
Student Guide SIPLACE HF/HF3
7 TWIN-Head Edition 09/2005
2
7.5.2 Position and assembly the nozzle changer
7.5.2.1 Position
Fig. 7.5 - 2 Position nozzle changer "Standard configuration" here are on location 3 HF machine
Legend (The blue numbers show the feeder areas.)
7.5.2.2 Assembly nozzle changer magazine
The nozzle changer together with the empty tape duct is fixed on the component docking unit. The
magazines are seated on a common support. They are centered with two parallel pins and fixed
in place with two countersunk screws.
Fig. 7.5 - 3 Assembly magazine
(1) Nozzle changer no. garage 1 (2) Standard magazine set up
(3) Magazine for special nozzles or grippers (4) Component reject bin
Option TWIN on G1
nozzle changer space
(4)