SG_FSE_SiplaceHF_HF3_00193901-05_eng.pdf - 第507页
1 - 33 S tudent Guide SIPLACE HF/HF3 Edition 09/2005 1 1 MTC 2 33 "Enter component level..." button The following dialog box for entering the component level is now displayed. Fig. 1 1.2 - 10 "Enter compo …
1 - 32
Student Guide SIPLACE HF/HF3
11 MTC 2 Edition 09/2005
32
– Division
Number of the component division in the waffle pack tray
(A maximum of 150 divisions can be defined.)
–
Component name
Name of the corresponding component in the waffle pack tray
Functions in the "Matrix-tray changer" view 11
"Go to refill position" button
The MTC 2 moves the tower to the refill position of the selected cassette.
The status indicator of the active tower turns yellow.
"Finish refilling position" button
Refilling is completed and placement with the selected cassette continues.
The status indicator of the active tower turns green.
NOTE
If
"With occupation check" is selected, the set-up of the refilled cassette is checked by moving
to every level of the selected cassette.
The result of the check is displayed in a separate dialog box.
"Feed tray" button
The selected waffle pack tray is moved out and into the transfer position
NOTE
If there is already a waffle pack tray in the transfer position, it is first moved back to the tower.
"Mech. functions..." button
Calls the single functions for the MTC 2, see section 11.2.9 "Single functions of the MTC 2".
"Single magazine" field:
"In operation" button
The waffle pack tray in the selected level is put into operation, which means that components can
be picked up from it. The component filling level for this level is displayed in green in the table.
1 - 33
Student Guide SIPLACE HF/HF3
Edition 09/2005 11 MTC 2
33
"Enter component level..." button
The following dialog box for entering the component level is now displayed.
Fig. 11.2 - 10 "Enter component level" dialog box
"New level" entry field:
➠ Enter the value for the actual number of refilled components.
Confirm your entry with
OK.
The component level displayed in the table is updated.
"Max. comp. level" button
Confirms that the waffle pack tray in the selected level is full.
The component level displayed in the table is updated.
"Complete cassette" field:
"Out of operation" button
All waffle pack trays in the selected cassette are put out of operation, which means that compo-
nents cannot be picked up from them. A message is displayed, and the component level for this
level is displayed in red in the table.
"Max. comp. level" button
Confirms that the waffle pack trays in all levels of the selected cassette are full.
The component level displayed in the table is updated.
1 - 34
Student Guide SIPLACE HF/HF3
11 MTC 2 Edition 09/2005
34
11.2.9 Single functions of the MTC 2
The ”Mechanical functions..." button in the "Matrix-tray changer" view (see Fig. 11.2 - 9) calls the
single functions for the MTC 2.
11.2.9.1 "Matrix-tray changer single functions" view
Fig. 11.2 - 11 "Matrix-tray changer single functions" dialog box
Functions in the "Matrix-tray changer single functions" view 11
"Transport position" button
Using this function, the MTC 2 is moved into a defined position for transport.
NOTE:The MTC 2 must not be in the refill position when this function is executed.
"Reference run" field:
"Entire MTC 2" button
A reference run is carried out with the entire MTC 2.
"Tower 1" button
A reference run is carried out with tower 1.
"Tower 2" button
A reference run is carried out with tower 2.
"Feed tray" area:
"Level:" entry field
Entry field for the level containing the waffle pack tray to be made available.
"Tower 1" button
The waffle pack tray of the level entered is moved out of tower 1.
"Tower 2" button
The waffle pack tray of the level entered is moved out of tower 2.