00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN.pdf - 第149页
Communication and Control Room for Your Sketches and Notes CAN Commands for Reading and Writing the Board IDs 149 Student Guide SIPLACE X-Serie and X4I SW70x (AL2) Room for Yo u r Sketches and Notes 4.7 Room for Your Ske…
Communication and Control
CAN Commands for Reading and Writing the Board IDs Board IDs
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 148
E 12 (Vision environment) EEPROM not available
E 20 (Twin head environment) No Twin head HW found
E 61 (Twin head environment) EEPROM data not plausible
E 62 (Twin head environment) EEPROM not available
E 68 (Twin head environment) On the head interface (C500) TQM module available -->
remove TQM from the C600 or set to RESET.
E 30 (C500 Head interface environment) No C500 board found (HW)
E 50 (C500 Head interface environment) more than one EEPROM‘s not available
E 51 (C500 Head interface environment) EEPROM Data not plausible ( board type recognition data
Adapter and Intermediate distributor not conform)
E 52 (C500 Head interface environment) board type recognition head interface (C500) not correct
E 53 (C500 Head interface environment) board type recognition head adapter not correct
E 54 (C500 Head interface environment) board type recognition intermediate distributor not correct
E 55 (C500 Head interface environment) EEPROM not available head interface (C500)
E 56 (C500 Head interface environment) EEPROM not available head adapter
E 57 (C500 Head interface environment) EEPROM not available or TQM on head interface (C500)
not available
E 58 (C500 Head interface environment) 8 bit processor on head adapter available or remove the 8
bit processor
E 59 (C500 Head interface environment) board type recognition head interface and head adapter
are not conform --> programming the correct board type.
E 5A (C500 Head interface environment) unknown head adapter --> programming the correct board
type.
E 5b (C500 Head interface environment) unknown head interface and head adapter -->
programming the correct board type.
E 5C (C500 Head interface environment) unknown head interface --> programming the correct
board type.
E 5d (C500 Head interface environment) unknown intermediate distributor --> programming the
correct board type.
E 5E (C500 Head interface environment) unknown Head adapter and intermediate distributor -->
programming the correct board type.
E 5F (C500 Head interface environment) Unknown head adapter and intermediate distributor
EEPROM.
Error message TQM module
E = Error
Description
Communication and Control
Room for Your Sketches and Notes CAN Commands for Reading and Writing the Board IDs
149 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Room for You r Sketches and Notes
4.7 Room for Your Sketches and Notes
Communication and Control
CAN Commands for Reading and Writing the Board IDs Room for Your Sketches and Notes
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 150