00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN.pdf - 第384页

Modular Conveyor Structure Function Description Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 384 Structur e of Qua d Lane Co nveyor 11.1.13.3 Structure of Quad Lane Conveyor Legend The quad lane conveyor has 4 lanes…

100%1 / 522
Modular Conveyor
Function Description Structure
383 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Structure of the Dual Conveyor
11.1.13.2 Structure of the Dual Conveyor
PCB transport - dual conveyor
Legend
The dual conveyor has two conveyor tracks. Depending on the placement mode, line concept and board
size, either the left, right or two outer conveyor sides can be selected as fixed sides.
1 Input belt 6 Lifting table placement area 2
2 Placement area 1 7 Output belt
3 Lifting table placement area 1 8 Assembly tub
4 Intermediate belt T1 Conveyor track 1
5 Placement area 2 T2 Conveyor track 2
Modular Conveyor
Structure Function Description
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 384
Structur e of Qua d Lane Co nveyor
11.1.13.3 Structure of Quad Lane Conveyor
Legend
The quad lane conveyor has 4 lanes. Conveyor lane 1 is divided into lanes 1L and 1R while conveyor
lane 2 is divided into lanes 2L and 2R.
This conveyor option allows you to produce a complete product with top and bottom sides on the same
conveyor lane. At the same time, another complete product can be produced on the second main lane.
Differences Be tween the X Serie s and X4I Conv eyors With SW70 x
11.1.13.4 Differences Between the X Series and X4I Conveyors With SW70x
▪ Each conveyor side has a fiducial for calibration of the fixed PCB reference corner (from SW70x).
▪ The conveyor and stop position (laser light barrier) in PA1 have been moved 70 mm in the direction
of the input conveyor (max. board length 380 mm).
▪ The length of the bumper under the lifting table plate has been changed from 20 mm to 35 mm. -->
Reduces the transportation times.
▪ Changed setting values for the lifting table times
▪ Changed conveyor zero point and coordinate system with introduction of SW70x
▪ Station software 70x now makes various conveyor modes possible (right, left, outer – fixed conveyor
side).
▪ Conveyor control with switch setting for X4I
(1R) Conveyor lane 1 right (1L) Conveyor lane 1 left
(2R) Conveyor lane 2 right (2L) Conveyor lane 2 left
(T) Transport direction
Modular Conveyor
Function Description Conveyor Modes
385 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Conveyor Modes
11.1.14 Conveyor Modes
Overview of Flexible Sin gle Conveyor
11.1.14.1 Overview of Flexible Single Conveyor
Overview of D ual Conveyor as Single Conv eyor
11.1.14.2 Overview of Dual Conveyor as Single Conveyor
Dual conveyor as single conveyor
Width of single conveyor
Legend
1. Single conveyor "Standard", max. width 1 x 460 mm
2. Single conveyor "excess width", max. width 1 x 508
mm
3. Fixed conveyor side on right
4. Lane 1
5. Board