00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN.pdf - 第474页
MTC2 SITEST Calibration Flow Charts MTC2 Calibration and Settings Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 474 Machine Dat a 13.3.2.3 Machine Data Save Machine-Data: With the SW 6 01, it is not possible to save …
MTC2
MTC2 Calibration and Settings SITEST Calibration Flow Charts
473 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Overview "calibration of feed axes 2/2"
MTC2
SITEST Calibration Flow Charts MTC2 Calibration and Settings
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 474
Machine Data
13.3.2.3 Machine Data
Save Machine-Data: With the SW 601, it is not possible to save the data onto the floppy disc.
Now you can choose a folder and save the mtc.ma (e.g. Memory Stick)
MTC2
MTC2 Calibration and Settings Adjustments Lifting Axes
475 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Adjustments Lifting Axes
13.3.3 Adjustments Lifting Axes
Overview of the lifting axes
Legend
Belt tensio n
13.3.3.1 Belt tension
Tools and Equipment
Tools and Equipment
▪ Belt frequency measurement device (inductive)
▪ 2 belt tension strips
1 Lifting axis tower 1 5 Spindle (shown here for tower 2)
2 Lifting axis tower 2 6 Inductive sensors (shown here for tower 2)
3 Servo motors of the lifting axes 7 Holes for the measurement head of the belt
frequency measuring device
4 Dual toothed belt (shown here for tower 2)
CAUTION
The construction of the lifting axis was change since 05.2005. This means, new spindle, spindle
with counter bearing, motor lifting axis, gear on the motor and therefore new parametersets for
Masterdrives. The MTC2 has the version number 02. The belt tension for the lifting axis was
change, please note!