00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN.pdf - 第422页

Head Modularity Calibration Head Modularity Twin Head to CPP/C&P Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 422 Head Mo dularity T win Head to CPP/C &P 12.5 Head Modularity Twin Head to CPP/C&P Procedu…

Head Modularity

Head Modularity CPP/C&P to Twin Head Calibration

421 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)

Head Modularity CPP/C&P to Twin Head

12.4 Head Modularity CPP/C&P to Twin Head

Procedure for head exchange CPP/C&P to TwinHead

Head Modularity

Calibration Head Modularity Twin Head to CPP/C&P

Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 422

Head Mo dularity T win Head to CPP/C &P

12.5 Head Modularity Twin Head to CPP/C&P

Procedure for head exchange TwinHead to CPP/C&P

Head Modular ity C&P20A to CPP Head

12.6 Head Modularity C&P20A to CPP Head

Preparation:

► Place the nozzles from all heads, even those which were not exchanged, in the nozzle changer.

► Back up the machine data with Save machine data.

► Switch off the machine.

NOTICE

After conversion, a new autoconfiguration file will be compiled when the machine is switched

back on.

Head Modularity

Head Modularity C&P20A to CPP Head Calibration

423 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)

► Dismantle the C&P20A placement head.

Protect the component sensor by fitting the red rubber hose onto the prisms and removing the

changeover table.

⇨ Remove the black compressed air hose from the distributor and from the head.

⇨ Loosen the flat ribbon cable from the head adapter but leave it on the head.

► Prepare the head plate as follows.

Preparing the X motor plate (head plate)

► Remove the cable holders (1).

► Check the length of the centering pins (2) before fitting a CPP head.

This may only extend 4.0 mm (tolerance: -0.2 mm) from the head plate.

► Remove the grub screws (3) from the head plate.

CAUTION

If the centering pins extend by more than 4.0 mm from the head plate, the incremental disk of

the star axis (glass) could be irreparably damaged during assembly of the CPP head!