00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN.pdf - 第443页
MTC2 Overview Operational Safety 443 Student Guide SIPLACE X-Serie and X4I SW70x (AL2) Information label at the groun d terminal Warning labels on the mo tor cont roller covers (b elow the enclos ure) No loads wa rning b…
MTC2
Operational Safety Overview
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 442
Warning labels on the enclosures around the electric parts
Warning label by the lifting axis motors
Warning labels by the toothed belts of the lifting axis and feed axis
Warning labels in the feeding area and the lifting frame area
Warning labels in the refill area (behind the protective doors)
MTC2
Overview Operational Safety
443 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Information label at the ground terminal
Warning labels on the motor controller covers (below the enclosure)
No loads warning by the feed axis
Information labels above the guides for the fork lift truck
Information label for the cranking device
MTC2
Operational Safety Overview
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 444
Safety Instruc tions for Tra nsporting the MTC2
Safety Instructions for Transporting the MTC2
Residual Volt ages at the In verters after Switching the MTC Off
Residual Voltages at the Inverters after Switching the MTC Off
After switching off the MTC2
▪ by pressing the EMERGENCY STOP button,
▪ by opening a protective door or
▪ via the SIPLACE station
it takes about 5 minutes before the intermediate-circuit voltages of the inverters have discharged down
to non-hazardous residual voltages.
When the MTC2 is switched off, the protective contactor combination is still supplied with 24 V AC from
the SIPLACE station.
Safety Instructions for Transporting the MTC2
▪ The MTC 2 should only be transported over any
significant distance using a suitable pallet jack or fork
lift truck.
▪ If the fork lift or pallet jack has adjustable forks, the
MTC2 must be lifted at the outer edge of the guide
rails.
▪ The forks should only be inserted into the guides from
the side on which tower 1 is located.
Legend
1. Guides