00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN.pdf - 第210页
Gantry Checking the Y Axis Dynamics Room for Your Sketches and Notes Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 210
Gantry
Room for Your Sketches and Notes Checking the Y Axis Dynamics
209 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Room for You r Sketches and Notes
6.6 Room for Your Sketches and Notes
Gantry
Checking the Y Axis Dynamics Room for Your Sketches and Notes
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 210
C&P20A
C&P20 And C&P20A Heads C&P20A Technical Data
211 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
C&P20A
7C&P20A
C&P20 An d C&P20A Heads
7.1 C&P20 And C&P20A Heads
Overview
7.2 Overview
C&P20A Technical Data
7.2.1 C&P20A Technical Data
NOTICE
The station software 70x generally supports the C&P20A heads. You recognize these by
means of a label attached to the front side of the placement head.
Machines with C&P20 heads which are upgraded from SW 60x to SW 70x will be recognized
by the station software. Thus they can still be used in the machine.
Collect&Place20 head overview
Legend
1. Star with 20 segments (DP drives)
2. Board for "holding circuit vacuum sensor"
3. Compressed air supply for holding, pickup and place
circuits
4. Cooling for X linear motor (discharged air from
pressure control valve)
5. Z axis return cylinder
6. Z linear motor with measuring system
7. Pressure control valve for pickup and place circuit
8. Component sensor
9. Star motor with incremental encoder
10. Component camera
NOTICE
Head Modularity
The axis dynamic settings at head replacement are adjusted automatically by axis parameter
changes during the reconfiguration.