00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN.pdf - 第318页
Collect, Pick and Place Head (CPP) Nozzle Station X4I for CPP Head Room for Your Sketches and Notes Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 318
Collect, Pick and Place Head (CPP)
Room for Your Sketches and Notes Nozzle Station X4I for CPP Head
317 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Collect, Pick and Place Head (CPP)
Nozzle Station X4I for CPP Head Room for Your Sketches and Notes
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 318
TwinHead
Overview Technical Data TwinHead
319 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
TwinHead
9TwinHead
Overview
9.1 Overview
Technical Da ta TwinHead
9.1.1 Technical Data TwinHead
Legend
1. Module 1
2. Module 2, rotated by 180° compared to module 1.
3. Main board on respective module
4. D axis
5. Linear motor Z axis
6. Z axis incremental measurement system
The TwinHead consists of two identical modules which
work according to the Pick&Place principle. The second
P&P head is rotated by 180 degrees.
For the TwinHead, new nozzles (Type 5xx) were
developed. However, the nozzles of the Pick&Place head
type 4xx and the nozzles of the Collect&Place heads type
8xx and 9xx can be used with an adapter.
Placement accuracy (X/Y) 35µm by 4 sigma with IC camera
Placement accuracy (X/Y) 30µm by 4 sigma with FC camera
Placement accuracy (Angle) 0,07° by 4sigma
Placement speed 3500 cph
Maximum component size: 50 to 40 mm (single measurement on both segments)
69 to 10 mm (multiple measurement on both segments)
125 to 10 mm (multiple measurement on one segment)
200 to 125 mm (multiple measurement with restrictions on
one segment)
Max. component height 25 mm
Placement force 1- 15N
D-Axis / Resolution direct drive / 0,001 degree
Z Axis / Resolution Linear motor / 0,5 µm
Travel range Z axis app. 60 mm
Nozzle types 5xx (4xx, 8xx, 9xx with adapter)
Distance between the segments approx. 71,00 mm
Max. weight of component 100 g
Option high force TwinHead placement
force
max. 30 N (only X series)