00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN.pdf - 第205页

Gantry Axis Control Checking the X Axis Dynamics 205 Student Guide SIPLACE X-Serie and X4I SW70x (AL2) Travel Time Table f or C&P20A X Axis 6.5.2.3 Travel Time Table for C&P20A X Axis Travel times for X gantry ax…

100%1 / 522
Gantry
Checking the X Axis Dynamics Axis Control
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 204
Comparison o f X Axis Travel Profiles for C&P20A, CPP a nd TwinHead
6.5.2.2 Comparison of X Axis Travel Profiles for C&P20A, CPP and TwinHead
Signal path at 15000 digit travel range of X axis for different head configurations
Legend
1. Axis start
2. The end position signal is triggered at different times, depending on the axis records for the 3 head
configurations.
CAUTION
The maximum position deviation for placement with:
C&P20A: 12 µm (digits)
CPP: 10 μm (digits)
TwinHead: 5 µm (digits)
Gantry
Axis Control Checking the X Axis Dynamics
205 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Travel Time Table for C&P20A X Axis
6.5.2.3 Travel Time Table for C&P20A X Axis
Travel times for X gantry axis
Travel Time Table for CPP X Axis
6.5.2.4 Travel Time Table for CPP X Axis
Travel times for X gantry axis
Travel T ime Table for Twin Head X Axis
6.5.2.5 Travel Time Table for Twin Head X Axis
Travel times for X gantry axis
Distance / digit X gantry axis with C&P20A
Target time / ms Tolerance /ms
600 27 +/-5
1000 27 +/-5
2000 27 +/-5
5000 27 +/-5
15000 42 +/-5
20000 48 +/-5
50000 74 +/-5
100000 103 +/-5
200000 146 +/-5
Distance / digit X gantry axis with CPP
Target time / ms Tolerance /ms
600 27 +/- 5
1000 27 +/- 5
2000 27 +/- 5
5000 30 +/- 5
15000 43 +/- 5
20000 49 +/- 5
50000 76 +/- 5
100000 107 +/- 5
200000 151 +/- 5
Distance / digit X gantry axis with Twin Head
Target time / ms Tolerance /ms
600 26 +/- 5
1000 28 +/- 5
2000 34 +/- 5
5000 41 +/- 5
15000 54 +/- 5
20000 59 +/- 5
50000 87 +/- 10
100000 125 +/- 10
200000 170 +/- 10
300000 209 +/- 15
Gantry
Checking the Y Axis Dynamics Axis Control
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 206
Checkin g the Y Axis D ynamics
6.5.3 Checking the Y Axis Dynamics
Measurem ent Setup
6.5.3.1 Measurement Setup
Comparison o f Y Axis Travel Profiles for C&P20A, CPP a nd TwinHead
6.5.3.2 Comparison of Y Axis Travel Profiles for C&P20A, CPP and TwinHead
Signal path at 15000 digit travel range of Y axis for the different head configurations
NOTICE
The measurement procedure follows the same preparations and procedures as for the X axis.