00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN.pdf - 第367页
Component Handling X Feeder Oper ation 367 Student Guide SIPLACE X-Serie and X4I SW70x (AL2) Display in the data men u Activation and Funct ion in the Service Technician Menu 10.2.7.14 Activation and Function in the Serv…
Component Handling
Operation X Feeder
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 366
Menu Transport Speed in the Main Menu
10.2.7.12 Menu Transport Speed in the Main Menu
Setting the transport speed
Data Menu
10.2.7.13 Data Menu
Calling up the data menu
▪ Press the SET Button until you see speed in the display
▪ Press the FOIL Button long
Back to the main menu
▪ Press the FOIL Button long
Component Handling
X Feeder Operation
367 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Display in the data menu
Activation and Function in the Service Technician Menu
10.2.7.14 Activation and Function in the Service Technician Menu
▪ The menu setting Service technician is only temporarily active. If a minute has passed since
the last time a button was pressed, the menu will automatically return to Standard and the menu
item Reference will be hidden again. You then need to reset the setting Service technician
manually.
▪The Service technician menu includes the item Reference as an additional entry. Here you
can start a reference run for the tape drive, if required.
Component Handling
Operation X Feeder
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 368
Service menu for reference run
Feeder Setti ngs at the Stat ion
10.2.7.15 Feeder Settings at the Station
CAUTION
During the reference run with a tape you have to open the pick up window and no foil in the foil
removal unit and you lost components.
► Recommendation: Carry out the reference run with out a tape.
View of feeder settings
The line GUI can be configured in the SIPLACE Pro
programming system, so that correct feeder data are sent
to the machine. For reliable production, we recommend
regularly updating the feeder data for the components, to
avoid incorrect operation of the feeders.
The adjacent diagram shows the correct transmission of
feeder settings from SIPLACE Pro.
If a spanner appears in the feeder status field, this means
that manual settings are needed.