00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN.pdf - 第514页
Measuring Equipment and Tools Scope of Delivery Belt Tension Device [00326015-01] Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 514 Belt Tens ion Device [00326 015-01] 14.6 Belt Tension Device [00326015-01] SIPLACE C…
Measuring Equipment and Tools
Track Signal Tester [00343785-01] Scope of Delivery
513 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Track Signal Tester [00343785-01]
14.4 Track Signal Tester [00343785-01]
Track Signal Tester [00322510-01]
14.5 Track Signal Tester [00322510-01]
Application:
The track signal tester is used to test the track signals of
the incremental measurement system for the gantry axes
(from SIPLACE HS50).
Application:
The track signal tester is used to test the track signals of
the incremental measurement system - particularly for
the head axes. It is also used for the track signals of the
gantry axes on older SIPLACE machines (S20, F4).
Measuring Equipment and Tools
Scope of Delivery Belt Tension Device [00326015-01]
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 514
Belt Tens ion Device [00326 015-01]
14.6 Belt Tension Device [00326015-01]
SIPLACE Compre ssed Air Teste r [00311487-01 ]
14.7 SIPLACE Compressed Air Tester [00311487-01]
Application:
The belt tension measuring device is used to measure
the belt tensions (toothed belt) at the machine.
Application:
The compressed air tester is used to set the air blast at
the C&P6 and C&P12 placement heads in the SIPLACE
placement machines.
Measuring Equipment and Tools
Location Tester Scope of Delivery
515 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Location Tester
14.8 Location Tester
Z End S topper St ar Gauge for C&P6/ 12 [03019865-01]
14.9 Z End Stopper Star Gauge for C&P6/12 [03019865-01]
Application:
The location tester is used to check the feeder
connections at the communication unit of the changeover
table.
Application:
The gauge is used to set the end stop position of the C&P
head Z axis.