00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN.pdf - 第204页

Gantry Checking the X Axis Dynamics Axis Control Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 204 Comparison o f X Axis Travel Profiles for C&P20A, CPP a nd TwinHe ad 6.5.2.2 Comparison of X Axis Trav el Profile…

100%1 / 522
Gantry
Axis Control Checking the X Axis Dynamics
203 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Measurem ent Setup with SA T Box and A364
6.5.2.1 Measurement Setup with SAT Box and A364
Measurement setup with SAT box
CAUTION
When checking the dynamics, it may be sufficient if you check the travel times and overshoot
behavior of the axis with the SIPLACE axis tester (SAT) display and the values in the settings
tables.
However, when checking for errors, you will need to use a suitable oscilloscope for the
dynamics analysis.
Gantry
Checking the X Axis Dynamics Axis Control
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 204
Comparison o f X Axis Travel Profiles for C&P20A, CPP a nd TwinHead
6.5.2.2 Comparison of X Axis Travel Profiles for C&P20A, CPP and TwinHead
Signal path at 15000 digit travel range of X axis for different head configurations
Legend
1. Axis start
2. The end position signal is triggered at different times, depending on the axis records for the 3 head
configurations.
CAUTION
The maximum position deviation for placement with:
C&P20A: 12 µm (digits)
CPP: 10 μm (digits)
TwinHead: 5 µm (digits)
Gantry
Axis Control Checking the X Axis Dynamics
205 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Travel Time Table for C&P20A X Axis
6.5.2.3 Travel Time Table for C&P20A X Axis
Travel times for X gantry axis
Travel Time Table for CPP X Axis
6.5.2.4 Travel Time Table for CPP X Axis
Travel times for X gantry axis
Travel T ime Table for Twin Head X Axis
6.5.2.5 Travel Time Table for Twin Head X Axis
Travel times for X gantry axis
Distance / digit X gantry axis with C&P20A
Target time / ms Tolerance /ms
600 27 +/-5
1000 27 +/-5
2000 27 +/-5
5000 27 +/-5
15000 42 +/-5
20000 48 +/-5
50000 74 +/-5
100000 103 +/-5
200000 146 +/-5
Distance / digit X gantry axis with CPP
Target time / ms Tolerance /ms
600 27 +/- 5
1000 27 +/- 5
2000 27 +/- 5
5000 30 +/- 5
15000 43 +/- 5
20000 49 +/- 5
50000 76 +/- 5
100000 107 +/- 5
200000 151 +/- 5
Distance / digit X gantry axis with Twin Head
Target time / ms Tolerance /ms
600 26 +/- 5
1000 28 +/- 5
2000 34 +/- 5
5000 41 +/- 5
15000 54 +/- 5
20000 59 +/- 5
50000 87 +/- 10
100000 125 +/- 10
200000 170 +/- 10
300000 209 +/- 15