00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN.pdf - 第18页
在线预览 00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN.pdf PDF 文档。
General
1
General
SIPLACE on the World Wide Web (WW W)
1.1
SIPLACE on the World Wide Web (WWW)
Log into our SIPLACE® homepage at http://www.siplace.com.
► Select either the German or English version.
The different sections contain information about our products, services and contact persons.
In addition, registered customers can access the
SIPLACE User Group
. Here you can call up special
information about our placement systems e.g.
▪ Technical documentation,
▪ Technical information,
▪ Spare parts lists etc.
Registration for the user group is very simple:
► Click on the Register link.
► Fill in the registration form and send it off to us.
Soon afterwards, you will receive your access authorization with USER ID and password.
Course Description AL2SXS
1.2
Course Description AL2SXS
Course type: AL2SXS Training for SIPLACE X series
Target group: Service personnel
Requirements: SIPLACE Advanced Level 1 Training for SIPLACE X
Course duration: 5 days
Course location: SIPLACE Training Center (with X Series machine and 70x.xx Software)
Course objective: The participants knows the different parts of a SIPLACE X, its functional
process and specific functions. Furthermore he knows axes dynamics of the
machine, understands the conveyor system as well as communication and
power supply of the subsystems. Spare parts replacement, adjustments and
calibration can be carried out. He comprehends the placement principle of the
machine in detail and is able to locate and fix machine relateted errors.
Furthermore the participants have command of head modularity and knows
the option MTC at the SIPLACE X.
Operational Safety
Safety Instructions Safety of Operators and Other Persons
19 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Operational Safety
2 Operational Safety
See also
13.1.4 Operational Safety [ ➙ 440]
Safety Instruc tions
2.1 Safety Instructions
The following safety instructions are only an excerpt from the chapter "Operational Safety" in the
SIPLACE user manual.
Safety of Op erators and Ot her Persons
2.1.1 Safety of Operators and Other Persons
Machine operators must only carry out work for which they have been adequately trained and with which
they are totally familiar.
Safety of Plan t and Equipme nt
2.1.2 Safety of Plant and Equipment
▪ Never make changes, however minor, unless you are totally aware of the effect they will have on the
overall functioning of the system.
▪ The stations must always be set up, retooled and maintained by appropriately trained personnel.
▪ Only use SIPLACE original spare parts and authorized accessories. The use of other parts will affect
safety and will invalidate the liability for any consequential damage.
▪ Do not make modifications to the safety equipment. Never bridge protective switches or remove
protective devices.
Warning Labels
2.2 Warning Labels
Warning Labels W201, W203 , W204 and W210 on the Ma chine
2.2.1 Warning Labels W201, W203, W204 and W210 on the Machine
The warning labels are made from soft PVC film, and are abrasion-proof, light-fast and resistant to water
and weathering. Their design meets the requirements of ISO 3864-2 and ANSI Z535.4.
CAUTION
Any staff working on the machine must be familiar with the safety instructions in this user
manual and observe these at all times.
WARNING
The system is electrically driven. When electrical devices are in use, certain parts carry
dangerous voltage levels.
► Switch off at the main switch and disconnect the placement system from the power supply
before carrying out any work on live components.
► Lock the machine.