00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN.pdf - 第506页
MTC2 Error messages issued via the st ation Room for Your Sketches and Notes Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 506 Room for Yo u r Sketches and Notes 13.5 Room for Your Sketches and Notes
MTC2
Masterdrives Error messages issued via the station
505 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
▪ F023: Overtemperature master drives:
Ventilation locked, wire break at sensor.
▪ F035: Axis in the limit switch
▪ F041: A fault has occurred during the storage of values in the EEPROM.
▪ F051: Fault at resolver or cable disconnected.
▪ F082: Telegram fault - no new process data received. Replace the assembly.
▪ F085: A fault has occurred during initialization of the controller assembly in the master drives.
See also
13.2.2 Incorporating the MTC in the SIPLACE station [ ➙ 450]
MTC2
Error messages issued via the station Room for Your Sketches and Notes
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 506
Room for You r Sketches and Notes
13.5 Room for Your Sketches and Notes
MTC2
Room for Your Sketches and Notes Error messages issued via the station
507 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)