00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN.pdf - 第76页
Overview CPP Head Overview of Components Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 76 Nozzle Statio n X4I for CPP Hea d Nozzle Station X4I for CPP Head Nozzle types 3.2.10.7 Nozzle types The wide c omponent sp ec…
Overview
Overview of Components CPP Head
75 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Nozzle Statio ns
3.2.10.6 Nozzle Stations
Universal N ozzle Statio n for X Serie s (X2, X3, X4)
Universal Nozzle Station for X Series (X2, X3, X4)
Nozzle station
The C&P20A nozzle station has been extended to include nozzle types for the CPP head:
▪ Reject station for C&P20A and CPP nozzles
▪ Take off for 20xx nozzles
▪ Take off for 28xx nozzles
Reject bin
Components and nozzles can be rejected into the following reject bin:
▪ Reject channel for component size: Up to 6x6 mm
▪ Reject bin in the nozzle station:
– All nozzle types (10xx, 20xx and 28xx nozzles)
– Component size: 6x6 to 27x27 mm
▪ Reject bin together with stationary camera
– Component size: Larger than 27x27 mm
Nozzle Statio ns for X4I
Nozzle Stations for X4I
Nozzle Statio n X4I for C&P20A Head
Nozzle Station X4I for C&P20A Head
Legend
1. Take off for 28xx nozzles
2. Reject station for C&P20A and CPP nozzles
3. Take off for 20xx nozzles
4. Take off for 10xx nozzles
Legend
1. Take off for 10xx nozzles
2. Reject station for C&P20A nozzles
Overview
CPP Head Overview of Components
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 76
Nozzle Statio n X4I for CPP Hea d
Nozzle Station X4I for CPP Head
Nozzle types
3.2.10.7 Nozzle types
The wide component spectrum available for the CPP head means that two different nozzle series are
needed: 20xx and 28xx.
Legend
1. Take off for 20xx nozzles
2. Take off for 28xx nozzles
3. Reject station for CPP nozzles
Nozzle type Component types Comments
2003 0402
2004 0603, 0805, 1206
2005 01005
2006 0201
2007 0402, 0603
2014 0603, 0805, 1206
2020 PLCC Height: Smaller than 0.75 mm
2021 PLCC Height: Smaller than 4.75 mm
2032 Mini melf, diodes
2033 1206, tantal
2034 Maxi melf, diodes
2035 Tantal C, SO
2036 Mini melf, diodes
2037 SO
2038 Al. Kond.
2039 Al. Kond.
2057 Calibration nozzle
2817 SOX Height: Larger than 0.75 mm, smaller than 4.5 mm
2820 PLCC
2821 PLCC Height: Larger than 4.25 mm, smaller than 8.25 mm
Overview
Overview of Components Twin Head
77 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Twin Head
3.2.11 Twin Head
Description
3.2.11.1 Description
Nozzle Changer for Twin Head
3.2.11.2 Nozzle Changer for Twin Head
Twin Head
Legend
1. Module 1
2. Module 2, rotate by 180 ° compared to module 1.
3. Main board on modul 1 and modul 2
4. D Axis
5. Linear motorZ Axis
6. Z axis incremental measurement system
The Twin head consists of two P&P heads of the same
model, which work according to the Pick&Place principle.
The second P&P head is installed on the gantry, at a
rotation of 180 degrees. One component after another
can be picked up per P&P, from the feeder module and
be optically centered by the stationary camera. On the
way to the placement position, the components are
rotated into the correct position. They are then carefully
positioned onto the board, with great precision and with
the help of a regulated air blast and preset force.
Type 5xx nozzles are used for the Twin head. Type 4xx
nozzles for the P&P head and type 8xx and 9xx nozzles
for the C&P heads can be used with an adapter.
Nozzle Changer for Twin head
SIPLACE X machines, equipped with a Twin head, have
one nozzle changer as a standard. This nozzle changer
is then installed in either sector 3 or sector 1.
The nozzle changer for a Twin head consists of a
standard module with 3 garages, each holding two
standard nozzles and one garage, holding one special
nozzle (see diagram).
Legend
1. Complete Nozzle changer
2. Extended Nozzle changer
3. Standard nozzle changer
NOTICE
If required, the above mentioned configurations can be changed and other magazines for
standard or special nozzles can be added individually.